Zvučne Kutije Aktivne

Sort By:  
Proizvođač: DAS AUDIO Avant 15A Dostupnost: Na stanju Šifra Proizvoda: 4698 Prikazana cena je za komad. Powered 2-way System 1 x 15\" + 1\" Driver Biamp 500 W LF + 100 W HF Features -Compact full-range system -Ultra lightweight 3rd generation Class D amplifier -Switch-mode power supply -Reduced size and weight -Pole mount socket -Rigging points The Avant series incorporates an impressive battery of high tech features that take powered portable systems to a new level of performance. The latest in Class D power amplification, digital signal processing and optimized D.A.S. components have been combined with enclosures designed for ease of transportation and road worthiness. The 600 W Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the Avant series one of the best sounding systems on the market. After all, isn´t quality sound what it´s all about? The Digital Signal Processsing (DSP) incorporated in the Avant series provides unparalleled control over the audio signal. Critical parameters have been fine tuned for each cabinet, yet their consistent sound \"signature\" allows them to perform seamlessly with other systems from the Avant family. The 15AV4 loudspeaker designed and built by D.A.S. provides powerful low frequency reproduction. High frequencies are handled by the M-50N compression driver which uses a neodymium magnet structure and 2\" titanium diaphragm for exceptional perormance in all types of applications. Technical Data Nominal LF Amplifier Power 500 W Nominal HF Amplifier Power 100 W Frequency Range (-10 dB) 45 Hz-20 kHz (EQ Flat) Rated Peak SPL at 1 m 133 dB Dispersion 80ºH x 50ºV rotatable horn Enclosure Material Plywood Color/Finish Black/Paint Connectors Input: Female XLR-Jack comboLoop Thru: XLRAC Input Male IEC AC Requirements 115 V, 50/60 Hz230 V, 50/60 Hz Dimensions (H x W x D) 83 x 44.8 x 47.6 cm32.7 x 17.6 x 18.7 in Weight 30 kg (66 lb)
1,129.00€
Prikazana cena je za komad. Features: -Powered 2-way, full-range system -15" bass loudspeaker -Compression driver with titanium diaphragm -Monitor position The DR-115A exemplifies the achievements of D.A.S. engineers in high pressure injection molding technology. The DR-115 mounts a proprietary 15” low frequency transducer and the high efficiency M-34 compression driver and CD horn assembly. The DR-115A incorporates the latest in amplifier technology. A Class “D” amplifier powers the low frequency section and a Class “A/B” powers the highs. Protection circuitry is provided for both amps and the components. Technical Data Nominal LF Amplifier Power 300 W Nominal HF Amplifier Power 100 W Frequency Range (-10 dB) 45 Hz-20 kHz Rated Peak SPL at 1 m 130 dB Dispersion 90ºH x 45ºV Enclosure Material Polypropylene Color/Finish Black Connectors Input: Female XLRLoop Thru: Male XLRAC Input: Male IEC AC Requirements 115 V, 50 Hz/60 Hz230 V, 50 Hz/60 Hz Current Draw (1/3 power @ 230 V) 0.66 A Dimensions (H x W x D) 71 x 46 x 42 cm28 x 16 x 16.5 in Weight 22.1 kg (48.5 lb)
750.00€
Prikazana cena je za komad. The DS-115A is a 2-way full range powered loudspeaker incorporating a 15” low frequency transducer and a 1” inch throat compression driver. Both transducers incorporate neodymium magnetic circuits. The DS-115A incorporates the latest in amplifier technology. A Class “D” amplifier powers the low frequency section and a Class “A/B” powers the highs. Protection circuitry is provided for both amps and the components. SPECIFICATIONS Frequency Range (-10 dB) 45 Hz-15 kHz Amplifier Power 300 W LF / 100 W HF Rated Peak SPL at 1 m 130 dB Dispersion 100ºH x 70ºV Enclosure Material Polypropylene AC Requirements 115 V, 50 Hz/60 Hz230 V, 50 Hz/60 Hz Current Draw (1/3 Power @ 230V) 0.66 A Dimensions (H x W x D) 71 x 46 x 42 cm(28 x 18.2 x 16.5 in) Weight 22.1 kg (48.5 lb)
890.00€
The Sub-18HA powered bass system incorporates a 18 in. low frequency transducer mounted as direct radiator into a bass-reflex cabinet. The loudspeaker is protected with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish. A top located pole socket permits mounting full-range systems above the Sub-18HA and two bar handles makes moving easy. Powered bass-reflex subwoofer system 500 W Class "D" amplifier 18 in. Low Frequency Speaker High-pass signal output Sub level gain control 12 M10 rigging points Top located pole mount socket SPECIFICATIONS Nominal LF Amplifier Power 500 W Frequency Range (-10 dB) 35 Hz – 125 Hz Rated Peak SPL at 1 m 131 dB SPL Internal Crossover Type: Linkwitz-Riley100 Hz, 24 dB/Octave Connectors Input: Female XLRLoop/X-over Out: 2 x Male XLRAC Input: PowerCon NAC3 Enclosure Material Plywood AC Requirements 115 V, 50 Hz/60 Hz230 V, 50 Hz/60 Hz Current Draw (1/3 Power @ 230V) 0.4 A Color / Finish Black / Paint Dimensions (H x W x D) 24.8 in. x 21.7 in. x 20.9 in. Weight 94 lbs
1,160.00€
QuickSmartDSP features best-in-class processing, EV’s signature single-knob user interface, and intuitive menu navigation via LCD.
0.00€
Prikazana cena je za komad. Evo2MaxX 4a 400W + 100W RMS 130dB SPL Processed Active Speaker
579.00€
Prikazana cena je za komad. INCREDIBLE!!! STRONG LIKE A HORSE!!! Processed Active Monitor 2-Way Bi-Amp Processed Active Monitor System > 500W Class D (LF) + 150W Class G (HF) Power Amplifiers. Comparing with the FBTMaxX 4a, these new built in-amplifiers offer an increased power capacity of +200W for the LF woofer and +50W for the HF driver. Peak power has almost doubled with up to 1000W for the LF woofer > +4dB more SPL (@ 1mt / music signal), thanks to the higher power handling, to a woofer offering a lower power compression and to a more sophisticated limiting circuit. > Increased efficiency with the addition of the very latest switch mode power supply and a Class G amplifier for the HF compression driver > Excellent WEIGHT/POWER ratio. HiMaxX 40a weighs just a bit more than the FBTMaxX 4a while the total power capacity has almost doubled > New FBT proprietary designed 12” (3” VC) B&C® custom made neodymium magnet woofer, has a more efficient ventilation system resulting in a 1.5dB reduction of power compression and a more rigid cone for increased reliability. The internal coil has 75mm (3”) diameter for greater power handling and reliability > New B&C® 1” (1.7” VC) HF compression driver with shorting copper cup for improved extension and efficiency in the mid-frequencies and lower distortion. The coil measures 44mm (1.7”) diameter and the driver is coupled to a 90°H x 60°V constant directivity horn > New FBT proprietary gas-injection polypropylene moulded asymmetrical trapezoidal design enclosure of extremely high quality, lightness, strength, resistance, flexibility and applications. The total volume increases +5Lt of load to the woofer, maintaining the same width and height of the FBTMaxX4 model, whilst producing a more powerful bass response. The reflex tuning ports are newly designed and optimised to reduce turbulences and compression. > The newly designed control panel features: - Combined Gain and Volume functions in the same rotary potentiometer offer easier and quicker control and provide an improved dynamic range and S/N ratio at the input stage - MIC/LINE input selector with Peak led - 2 independent input channels (1 x XLR/Jack, 1 x AUX L/R Cinch RCA with volume) to connect also external devices such as MP3, CD, PC, players. This feature may replace the use of an external mixer in such applications like: microphone music base - 3-band equalization (High/Mid/Low) - Ground Lift switch - 3 x Status LEDs: Power, Limiter, Protection HiMaxX 40a - Specifications Model HiMaxX 40a Configuration way 2 Built-in amplifier LF/HF W rms 500/150 Frequency response @-6dB 45Hz - 20KHz Low frequency woofer inch 1x12 - 3 coil High frequency driver inch 1 - 1.7coil Sensitivity (@1W/1m) dB 99 Maximum SPL dB 127 Dispersion H x V 90° x 60° Input impedance kOhm 22 Crossover frequency kHz 1,6 Input connectors XLR with loop RCA aux Power cord m/ft 5 / 16.4” Net dimensions (WxHxD) mm/inch 407x634x370 / 16.02x24.96x14.56 Net weight kg/Lb 17,9 / 39.46 Shipping dimensions (WxHxD) mm/inch 495x720x470 / 19.48x28.34x18.50 Shipping weight kg/Lb 20,5 / 45.19
1,249.00€
Prikazana cena je za komad. PROCESSED ACTIVE SPEAKER 1100W + 250W RMS - 135DB SPL With the new HiMaxX series, FBT establishes a reference point on the scenario of 12” and 15” enclosures in polypropylene for sound reinforcement, introducing performance and technical content of a standard unthinkable up until now. FBT HiMaxX takes its place alongside the FBTMaxX series, exalting all the technical features.
1,490.00€
Prikazana cena je za komad. FBT J-Series J15a Active Full Range Speaker - 15"+1" Driver, biamped switched mode amp, 350W LF + 100W HF thomann RMS class-D, 48Hz-20kHz, 90° x 60°, internal DSP with 4 switchable EQ presets, wedge angles, XLR in/out, volume, 2x M10 flying points, 35mm pole mount, black plastic housing. Dimensions: 410 x 663 x 387mm. Weight: 14 kg
579.00€
Prikazana cena je za komad. FBT J-Series J8a Active Full Range Speaker - 8"+1" Driver, biamped switched mode amp, 200W LF + 50W HF thomann RMS class-D,60Hz-20kHz, 90° x 60°, internal DSP with 2 switchable EQ presets, wedge angles, XLR in/out, volume, 2x M5 flying points, 25mm pole mount, black plastic housing. Dimensions: 255 x 415 x 245mm. Weight: 8,2 kg, Optional cover 178863
379.00€
Prikazana cena je za komad. Jolly 15B A / Processed Active Monitor 300W + 50W - 127dB SPL Player video storage 300W + 50W - 127dB SPL Processed Active Monitor Specifications 2-way bi-am amplified system in Bass-Reflex 380mm (15”) high efficiency and high excursion custom speaker 25mm (1”) custom compression driver 300Wrms MOS-FET amplifier for low frequencies 50W rms class AB amplifier for high frequencies 90°H x 60°V constant directivity horn ADAP® (Advanced Dynamic Active Protection) processor to limit overload Polypropylene enclosure with integrated handle, 2 x M10 anchoring points, 35mm (1.38”) pole mount socket Download datasheetDownload user manual
549.00€
Prikazana cena je za komad. The Mitus 115a - 600W + 300W 133DB SPL PROCESSED ACTIVE SPEAKER
1,499.00€
Prikazana cena je za komad. FBT ProMaxx 12a Active Full Range Speaker - 12"+1" B&C neodymium drivers, biamped switched mode amp, 600W LF + thomann 300W HF, 48Hz-20kHz, 90° x 60°, internal DSP with 8 switchable EQ presets, 3 wedge angles (12°, 40° and 55°), XLR in/out, volume, HP filter, ground lift switch, 2x M10 flying points, 35mm pole mount, black plastic housing. Dimensions: 402 x 644 x thomann 345mm. Weight: 15kg
899.00€
Prikazana cena je za komad. 2-way, bi-amplified, bass reflex design cabinetNEW! 355 mm (14") LF neodymium magnet woofer with 75mm (3") voice coil, custom made for FBT by B&C35 mm (1.4'') exit throat B&C HF neodymium magnet compression driver with 64 mm (2.5") voice coilFrequency Response from 45Hz - 20 kHzBiamped: 600W RMS LF, 300W RMS HF, Class D power amplifiers with switch mode power suppliesDigital Signal Processor with 8 equalization presetControl Panel: features XLR input and link out, Volume, EQ Presets, HP Filter, Ground-Lift Switch90°H x 60°V Constant Directivity HornCompact Dimensions: ProMaxX 14a uses the same size gas-injected polypropylene molded enclosure as the ProMaxX 12a, but features our New 14" LF Woofer for more low frequency SPLDual Purpose: Front of House or Stage Floor Monitor: with 12°, 40° and 55° monitoring angles2 x M10 suspension points, 35 mm (1,3/8") top-hat speaker stand socket, wall bracket mount flange plateExtremely light, only 16.5 kg ( 36.4 lbs.) FEATURES2-way bi-amplied bassreex design cabinetSturdy gas-injected polypropylene molded enclosure600w RMS LF, 300w RMS HF, Class D powerampliers14" B&C neodymium woofer with 3" voice coil1.4" exit throat B&C neodymium compression driverwith 2.5" voice coil90° H x 60° V Constant Directivity HornDigital Signal Processor with 8 EQ PresetsControl Panel with XLR HPlter, Ground liftswitcSPL capability: 135.5dB2 x M10 y pointsDual purpose: Front of House or Stage Floor MonitorCompletely Manufactured in Ital
1,069.00€
FBT VERTUS CLA was created with the thought of integrating professional line array technology in an extremely compact and elegant speaker column.
849.00€
Prikazana cena je za komad. VERTUS CLA604A 400W + 100W RMS 125DB SPL COLUMN ACTIVE LINE ARRAY
949.00€
Snizeno sa 3499eura Completely made in Italy The Vertus system comprises of:2 x CLA 604a active column speakers 2 x CLA 208Sa active subwoofers 2 x VT-S604 speaker poles 2 x KMS220 Adaptors 4 x Neutrik Powercon Cables This system is easily expandable with the addition of further CLA604a’s and CLA208SAa’s Very light and easy to carry Features The internal Class D amplifier delivers 600W in the CLA 208Sa and 400W + 100W in the CLA 604a. These are matched with a switch mode power supply and a DSP processor with filtering functions, equalization and speaker protection. Created with the idea of extending the CLA604a’s low frequency performance in live applications, the CLA208Sa serves as the base support for the CLA604a column speaker which can either be frontally mounted to the sub, as well as fixed upon the optional stand through the M20 socket on the upside of the sub. The CLA208Sa subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. QSL’s Verdict “The Vertus system (the CLA208 combined with the CLA604) is a stunning system with excellent dispersion and can be used in a variety of configurations.” Specifications CLA 208Sa Vertus CLA208Sa 600W RMS 129dB SPL Processed Active Subwoofer · Active subwoofer in bass-reflex design · 2 x 8” (200mm) custom neodymium, high-excursion woofer with 2” (50 mm) voice coil · 50Hz to 180Hz frequency response · Class D 600W RMS amplifier with switch mode power supply · DSP processor with 4 available presets · Control panel with combo XLR/Jack stereo input and link, XLR Hi-pass out stereo, volume, presets, 0°-180° phase switch, status LED · Neutrik POWERCONN input and link · 15mm birch plywood enclosure with anti-scratch paint finish, stackable · M20 stand adapter, 2 integrated handles, front hardware to sustain CLA206LA modules · Suitable for low frequency extension and reinforcement of the CLA604A array, especially for live performance CLA 604a Vertus CLA604A 400W + 100W RMS 125dB SPL Column Active Line Array · 2-way bi-amplified Line Array Column · 6 x 4” (100mm) custom woofer with 1” (25 mm) voice coil · 4 x 1” (25mm) neodymium dome tweeter on waveguide · 130Hz to 20KHz frequency response · Class D 400Wrms amplifier for LF and 100Wrms for HF with switch mode power supply · DSP processor with 4 available equalization presets · Control panel with volume, presets, HP filter, Mic-Line, status LED · XLR input and Neutrik POWERCONN supply input at the lower part of the column; XLR link and Neutrik POWERCONN loop output at the higher part, in order to hide each connection cable · 100°H x 20°V dispersion · Extruded-aluminum powder-coated cabinets. Superior latching system, enables the extension of the length of the line array by adding CLA604A modules for increased modularity of the system. · Possibility to angle the columns of +/- 30° on a horizontal plane · Ideal for both live applications, assisted by the CLA 208SA active subwoofer, as well as for fixed installation · Easily expandable for a total power of 6600W (stereo system composed of 3 x CLA604A and 3 x CLA208SA) · Very light and easy to carry User Manual Download pdf
2,799.00€
Prikazana cena je za komad. Your music, your performance or your installation can count on FBT’s new X-LITE series of portable powered speaker systems. Constructed out of polypropylene enclosures, the X-LITE series features a sleek design including 3 x carrying handles and 4 x M10 flying points. In addition, the full front grille provides complete protection, delivering elegance and sturdiness. Features include built-in Class D amplifier modules providing an amazing 1000W of power to satisfy the most demanding applications, whilst the user-friendly DSP allows 4 x EQ preset selection to perfectly tailor the performance of your X-LITE to your sound requirements. In addition, the X-LITE series is truly versatile, offering a professional control panel that allows you to set up configurations with or without subs. Even better – if you do want to extend the X-LITE low frequency response, you can do so with the dedicated X-SUB 18” powered subwoofer.
409.00€
Prikazana cena je za komad. Your music, your performance or your installation can count on FBT’s new X-LITE series of portable powered speaker systems. Constructed out of polypropylene enclosures, the X-LITE series features a sleek design including 3 x carrying handles and 4 x M10 flying points. In addition, the full front grille provides complete protection, delivering elegance and sturdiness. Features include built-in Class D amplifier modules providing an amazing 1000W of power to satisfy the most demanding applications, whilst the user-friendly DSP allows 4 x EQ preset selection to perfectly tailor the performance of your X-LITE to your sound requirements. In addition, the X-LITE series is truly versatile, offering a professional control panel that allows you to set up configurations with or without subs. Even better – if you do want to extend the X-LITE low frequency response, you can do so with the dedicated X-SUB 18” powered subwoofer.
469.00€
Your music, your performance or your installation can count on FBT’s new X-LITE series of portable powered speaker systems. Constructed out of polypropylene enclosures, the X-LITE series features a sleek design including 3 x carrying handles and 4 x M10 flying points. In addition, the full front grille provides complete protection, delivering elegance and sturdiness. Features include built-in Class D amplifier modules providing an amazing 1000W of power to satisfy the most demanding applications, whilst the user-friendly DSP allows 4 x EQ preset selection to perfectly tailor the performance of your X-LITE to your sound requirements. In addition, the X-LITE series is truly versatile, offering a professional control panel that allows you to set up configurations with or without subs. Even better – if you do want to extend the X-LITE low frequency response, you can do so with the dedicated X-SUB 18” powered subwoofer.
579.00€
The Mackie SRM450 v2 Active Speaker puts your focus on your performance instead of the distraction of constant EQ and level tweaks. While live sound can sometimes seem like a wild, uncaged animal, with the SRM450 Portable Active Loudspeaker, Mackie has created technology to help tame the beast. Thanks to the Mackie SRM450 v2 speaker's all-new design—from adding new amps and transducers to a new lightweight power supply—the SRM450 v2 surpasses the performance of the original SRM450 to deliver pure studio monitor sound at more powerful, full-on loudspeaker levels. Mackie has also managed to keep the SRM450 v2 affordable for musicians despite a complete redesign from the inside out.
699.00€
Proizvođač: MARTIN WISMAN ART 300A Dostupnost: Na stanju Šifra Proizvoda: 4943 Prikazana cena je za komad. 12-Inch Two-Way Active System FEATURES Two way active system Microphone input, Line input High quality plastic cabinet, waterproof and sunscreening APPLICATIONS Railway station, metro station Conference meeting room Outdoor venue SPECIFICATION System type: 2 –way12’’ Frequency response: 50hz-18khz Dispersion: 90°×60° Handling power: 500W peak Sensitivity: 98db Maximum spl: 122 db Suspension: yes Dimensions: 428×315.5×572mm Net weight: 21 kg
259.00€
Proizvođač: MARTIN WISMAN ARTX 200A Dostupnost: Na stanju Šifra Proizvoda: 1018 Prikazana cena je za komad. ARTX-200А System Active 2-Way full range 200W D class Woofer 10” Tweeter 1.34” Power 200W D class Impedance 4 Ohm Frequency Range 55Hz - 18KHZ Sensitivity 96dB(+/-2dB) Connector XLR / 6.35mm / RCA Mic Input Level ≤ 25 mV Line input / Output level 350 mV
179.00€
Prikazana cena je za komad. ARTX-300А System Active 2-Way full range 550W D class Woofer 12” Tweeter 1.34” Power 550W D class Impedance 4 Ohm Frequency Range 50Hz - 18KHZ Sensitivity 98dB(+/-2dB) Connector XLR / 6.35mm / RCA Mic Input Level ≤ 25 mV Line input / Output level 350 mV
189.00€
Prikazana cena je za komad. ARTX-500А System Active 2-Way full range 650W D class Woofer 15” Tweeter 1.75” Power 650W D class Impedance 4 Ohm Frequency Range 40Hz - 18KHZ Sensitivity 99dB(+/-2dB) Connector XLR / 6.35mm / RCA Mic Input Level ≤ 25 mV Line input / Output level 350 mV
269.00€
Prikazana cena je za komad. SPL 500-APortable Powered Speaker System Key Features:• High Impact Molded Polypropylene Enclosure• Big Dynamic Switch Mode Power Supply• Built- in High Efficient Class D Amplifier•15" Mid-Low Frequency Transducer• 1" Compression High Frequency Driver• 80°X 60°Coverage Pattern• Smooth Response With High Power Handling Capcity (long Term/Max), 124dB/l27dB• 5 lntegral Suspension Points• Complete Mounting Solutions The SPL-500A features a molded polypropylene enclosure that it inherently weather resistant. Amplification,mixing,and monitoring for electronic and electro-acoustic instruments. Martin Wisman audio used advanced program techniques to create the most successful andin fl uent-ial professional speaker system. High power, efficiency, lower distortion and great low frequency extension provide an unbelievable performance. SPL-500A can be used for live sound reinforcement, vocals, speech and music playback in entertainment, schools, pub, coffee shop and outdoor venues. Portability is one of the important factors for choice especially. For permanent suspension or attaching brackets, the SPL-500A also has two M8 inserts on the top and bottom, two on the side, for a total of 5. Technical Specification:Freq.Range(-1 OdB ): 45Hz-19kHzFreq .Response( -3d B): 55Hz-19kHzRec.Hipass Frequency: 40HzMax Calculated SPL: 127dBHorizontal Coverage: 80°Vertical Coverage: 60°Amplifier Power LF: 450WAmplifier Power HF: sowLF Transducer: 15"/65mmHF Transducer: 1 "/25mmCrossover Frequency: 2.2kHzLoop/Mix Out: XLR/M,BalancedAC Input: 220V-240 V,AC,50/60Hz, 750 WattsDim (HXWXO): 740mmX475mmX400mmNet Weight: 22.5KgShipping Weight: 25.5Kg
489.00€
PRIKAZANA CENA JE ZA KOMAD!!! Technical Specifications Freq. Range (-10dB): 60Hz~20kHz Freq. Response (-3dB): 75Hz~20kHz Rec.Hipass Frequency: 50Hz Max Calculated SPL: 117dB Amplifier Power LF: 100W Amplifier Power HF: 50W LF Transducer: 8" HF Transducer: 1" Crossover Frequency: 3.5kHz Loop/Mix Out: XLR/M,Balanced AC Input: 110/220 V, AC, 50/60Hz, 180 Watts Dim (HxWxD): 435mm x 255mm x 245mm Net Weight: 9.5Kg Shipping Weight: 11Kg Horizontal Coverage: 90º Vertical Coverage: 60º ŠALJEMO NA ADRESU!!!
159.00€
Prikazana cena je za komad. High Impact Molded Polypropylene Enclosure 15L350-81 15 LF Transducer 1.75" Voice Coil, 1" Exit Titanium Compression Driver 5 Integral Suspension Points Complete Mounting Solutions Smooth Response With High Power Handling Capacity (Continuous Program/ RMS), 1400W/350W 80 x 60 Coverage Pattern
389.00€
Jedna aktivna i jedna pasivna kutija Snaga: 2 x 120/80 W (8 Ohm) Niskotonski zvučnik: 250 mm papirna tkanina Piezo visokotonski zvučnik: 250 x 100 mm Ugrađena mikseta sa pojačalom Čitač kartice USB-SD/SDHC/MMC stereo MP3 plejer EHO funkcija Regulacija boje tona
199.00€
Trosistemska bas-refleks izvedba Snaga: 2 x 120/80 Watt Frekvencija: 35 – 21.000 Hz Niskosrednji: papirna tkanina 200 mm Srednjotonski: 100 mm Ugrađeno pojačalo sa miksetom KARAOKE funkcija Zaštita od mikrofonije Regulacija boje tona niski/visoki Mikrofonski ulaz: 2 x 6,3 mm utičnica (MIC) Audio ulaz: 2 x RCA utičnica (L+R INPUT)
139.00€
DAS AUDIO Avant 15A (Avant 15A)
Powered 2-way System1 x 15\" + 1\" DriverBiamp 500 W LF + 100 W HF Features-Compact full-range system-Ultra lightweight 3rd generation Class D amplifier-Switch-mode power supply-Reduced size and weight-Pole mount socket-Rigging pointsThe Avant series incorporates an impressive battery of high tech features that take powered portable systems to a new level of performance. The latest in Class D power amplification, digital signal processing and optimized D.A.S. components have been combined with enclosures designed for ease of transportation and road worthiness.The 600 W Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the Avant series one of the best sounding systems on the market. After all, isn´t quality sound what it´s all about?The Digital Signal Processsing (DSP) incorporated in the Avant series provides unparalleled control over the audio signal. Critical parameters have been fine tuned for each cabinet, yet their consistent sound \"signature\" allows them to perform seamlessly with other systems from the Avant family.The 15AV4 loudspeaker designed and built by D.A.S. provides powerful low frequency reproduction. High frequencies are handled by the M-50N compression driver which uses a neodymium magnet structure and 2\" titanium diaphragm for exceptional perormance in all types of applications.Technical DataNominal LF Amplifier Power500 WNominal HF Amplifier Power100 WFrequency Range (-10 dB)45 Hz-20 kHz (EQ Flat)Rated Peak SPL at 1 m133 dBDispersion80ºH x 50ºV rotatable hornEnclosure MaterialPlywoodColor/FinishBlack/PaintConnectorsInput: Female XLR-Jack comboLoop Thru: XLRAC Input Male IECAC Requirements115 V, 50/60 Hz230 V, 50/60 HzDimensions (H x W x D)83 x 44.8 x 47.6 cm32.7 x 17.6 x 18.7 inWeight30 kg (66 lb)
Proizvođač: DAS AUDIO Avant 15A Dostupnost: Na stanju Šifra Proizvoda: 4698 Prikazana cena je za komad. Powered 2-way System 1 x 15\" + 1\" Driver Biamp 500 W LF + 100 W HF Features -Compact full-range system -Ultra lightweight 3rd generation Class D amplifier -Switch-mode power supply -Reduced size and weight -Pole mount socket -Rigging points The Avant series incorporates an impressive battery of high tech features that take powered portable systems to a new level of performance. The latest in Class D power amplification, digital signal processing and optimized D.A.S. components have been combined with enclosures designed for ease of transportation and road worthiness. The 600 W Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the Avant series one of the best sounding systems on the market. After all, isn´t quality sound what it´s all about? The Digital Signal Processsing (DSP) incorporated in the Avant series provides unparalleled control over the audio signal. Critical parameters have been fine tuned for each cabinet, yet their consistent sound \"signature\" allows them to perform seamlessly with other systems from the Avant family. The 15AV4 loudspeaker designed and built by D.A.S. provides powerful low frequency reproduction. High frequencies are handled by the M-50N compression driver which uses a neodymium magnet structure and 2\" titanium diaphragm for exceptional perormance in all types of applications. Technical Data Nominal LF Amplifier Power 500 W Nominal HF Amplifier Power 100 W Frequency Range (-10 dB) 45 Hz-20 kHz (EQ Flat) Rated Peak SPL at 1 m 133 dB Dispersion 80ºH x 50ºV rotatable horn Enclosure Material Plywood Color/Finish Black/Paint Connectors Input: Female XLR-Jack comboLoop Thru: XLRAC Input Male IEC AC Requirements 115 V, 50/60 Hz230 V, 50/60 Hz Dimensions (H x W x D) 83 x 44.8 x 47.6 cm32.7 x 17.6 x 18.7 in Weight 30 kg (66 lb)
1,129.00€
DAS AUDIO DR 115A (DR 115A)
Features: -Powered 2-way, full-range system -15" bass loudspeaker -Compression driver with titanium diaphragm -Monitor position The DR-115A exemplifies the achievements of D.A.S. engineers in high pressure injection molding technology. The DR-115 mounts a proprietary 15” low frequency transducer and the high efficiency M-34 compression driver and CD horn assembly. The DR-115A incorporates the latest in amplifier technology. A Class “D” amplifier powers the low frequency section and a Class “A/B” powers the highs. Protection circuitry is provided for both amps and the components. Technical Data Frequency Range (-10 dB) 45 Hz-20 kHz Rated Peak SPL at 1 m 130 dB Dispersion 90ºH x 45ºV Enclosure Material Polypropylene Color/Finish Black Connectors Input: Female XLR Loop Thru: Male XLR AC Input: Male IEC AC Requirements 115 V, 50 Hz/60 Hz 230 V, 50 Hz/60 Hz Current Draw (1/3 power @ 230 V) 0.66 A Dimensions (H x W x D) 71 x 46 x 42 cm 28 x 16 x 16.5 in Weight 22.1 kg (48.5 lb)
Prikazana cena je za komad. Features: -Powered 2-way, full-range system -15" bass loudspeaker -Compression driver with titanium diaphragm -Monitor position The DR-115A exemplifies the achievements of D.A.S. engineers in high pressure injection molding technology. The DR-115 mounts a proprietary 15” low frequency transducer and the high efficiency M-34 compression driver and CD horn assembly. The DR-115A incorporates the latest in amplifier technology. A Class “D” amplifier powers the low frequency section and a Class “A/B” powers the highs. Protection circuitry is provided for both amps and the components. Technical Data Nominal LF Amplifier Power 300 W Nominal HF Amplifier Power 100 W Frequency Range (-10 dB) 45 Hz-20 kHz Rated Peak SPL at 1 m 130 dB Dispersion 90ºH x 45ºV Enclosure Material Polypropylene Color/Finish Black Connectors Input: Female XLRLoop Thru: Male XLRAC Input: Male IEC AC Requirements 115 V, 50 Hz/60 Hz230 V, 50 Hz/60 Hz Current Draw (1/3 power @ 230 V) 0.66 A Dimensions (H x W x D) 71 x 46 x 42 cm28 x 16 x 16.5 in Weight 22.1 kg (48.5 lb)
750.00€
DAS AUDIO DS 115A (DS 115A)
The DS-115A is a 2-way full range powered loudspeaker incorporating a 15” low frequency transducer and a 1” inch throat compression driver. Both transducers incorporate neodymium magnetic circuits. The DS-115A incorporates the latest in amplifier technology. A Class “D” amplifier powers the low frequency section and a Class “A/B” powers the highs. Protection circuitry is provided for both amps and the components. SPECIFICATIONS Frequency Range (-10 dB) 45 Hz-15 kHz Amplifier Power 300 W LF / 100 W HF Rated Peak SPL at 1 m 130 dB Dispersion 100ºH x 70ºV Enclosure Material Polypropylene AC Requirements 115 V, 50 Hz/60 Hz 230 V, 50 Hz/60 Hz Current Draw (1/3 Power @ 230V) 0.66 A Dimensions (H x W x D) 71 x 46 x 42 cm (28 x 18.2 x 16.5 in) Weight 22.1 kg (48.5 lb)
Prikazana cena je za komad. The DS-115A is a 2-way full range powered loudspeaker incorporating a 15” low frequency transducer and a 1” inch throat compression driver. Both transducers incorporate neodymium magnetic circuits. The DS-115A incorporates the latest in amplifier technology. A Class “D” amplifier powers the low frequency section and a Class “A/B” powers the highs. Protection circuitry is provided for both amps and the components. SPECIFICATIONS Frequency Range (-10 dB) 45 Hz-15 kHz Amplifier Power 300 W LF / 100 W HF Rated Peak SPL at 1 m 130 dB Dispersion 100ºH x 70ºV Enclosure Material Polypropylene AC Requirements 115 V, 50 Hz/60 Hz230 V, 50 Hz/60 Hz Current Draw (1/3 Power @ 230V) 0.66 A Dimensions (H x W x D) 71 x 46 x 42 cm(28 x 18.2 x 16.5 in) Weight 22.1 kg (48.5 lb)
890.00€
DAS AUDIO SUB 18HA (SUB 18HA)
The Sub-18HA powered bass system incorporates a 18 in. low frequency transducer mounted as direct radiator into a bass-reflex cabinet. The loudspeaker is protected with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish. A top located pole socket permits mounting full-range systems above the Sub-18HA and two bar handles makes moving easy.Powered bass-reflex subwoofer system500 W Class "D" amplifier18 in. Low Frequency SpeakerHigh-pass signal outputSub level gain control12 M10 rigging pointsTop located pole mount socketSPECIFICATIONSNominal LF Amplifier Power500 WFrequency Range (-10 dB)35 Hz – 125 HzRated Peak SPL at 1 m131 dB SPLInternal CrossoverType: Linkwitz-Riley100 Hz, 24 dB/OctaveConnectorsInput: Female XLRLoop/X-over Out: 2 x Male XLRAC Input: PowerCon NAC3Enclosure MaterialPlywoodAC Requirements115 V, 50 Hz/60 Hz230 V, 50 Hz/60 HzCurrent Draw (1/3 Power @ 230V)0.4 AColor / FinishBlack / PaintDimensions (H x W x D)24.8 in. x 21.7 in. x 20.9 in.Weight94 lbs
The Sub-18HA powered bass system incorporates a 18 in. low frequency transducer mounted as direct radiator into a bass-reflex cabinet. The loudspeaker is protected with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish. A top located pole socket permits mounting full-range systems above the Sub-18HA and two bar handles makes moving easy. Powered bass-reflex subwoofer system 500 W Class "D" amplifier 18 in. Low Frequency Speaker High-pass signal output Sub level gain control 12 M10 rigging points Top located pole mount socket SPECIFICATIONS Nominal LF Amplifier Power 500 W Frequency Range (-10 dB) 35 Hz – 125 Hz Rated Peak SPL at 1 m 131 dB SPL Internal Crossover Type: Linkwitz-Riley100 Hz, 24 dB/Octave Connectors Input: Female XLRLoop/X-over Out: 2 x Male XLRAC Input: PowerCon NAC3 Enclosure Material Plywood AC Requirements 115 V, 50 Hz/60 Hz230 V, 50 Hz/60 Hz Current Draw (1/3 Power @ 230V) 0.4 A Color / Finish Black / Paint Dimensions (H x W x D) 24.8 in. x 21.7 in. x 20.9 in. Weight 94 lbs
1,160.00€
ELECTRO VOICE EKX 15P (EKX 15P)
High-efficiency 1500 W Class D power amplifier delivers up to 134 dB peak SPL on the EKX-15P via high-sensitivity transducers designed and engineered by EV. Intelligent thermal management with a variable-speed fan controlled by multiple onboard sensors, ensuring superior performance and reliability in demanding environmental conditions. EV-patented Signal Synchronized Transducers™ (SST) waveguide design provides precise and consistent coverage. Lightweight, compact 15-mm wood enclosure with internal bracing, durable EVCoat finish, eight M10 threaded mounting points, aluminum pole mounts, and all-metal handles. Connector Type (1) Stereo RCA input, (2) XLR/TRS combo jack, and (1) XLR link output Coverage (Nominal -6 dB) H 90 ° Coverage (Nominal -6 dB) V 60 ° Crossover Frequency 1.7 k Hz Enclosure Material 15 mm, plywood with EVCoat Frequency Response (-10 dB) 48 Hz - 20 kHz Hz Full space measurement using the music DSP preset Frequency Response (-3 dB) 55 Hz - 18 kHz Hz Full space measurement using the music DSP preset Grill 18 AWG steel with powdercoat HF Transducer DH-1M 1-inch titanium compression driver LF Transducer EVS-15M 381 mm (15 in) Maximum SPL 134 dB Maximum SPL is measured at 1 m using broadband pink noise at maximum output Power Consumption 1.8 A Current rating is 1/8 power Power Rating 1500 W Shipping Weight 29.5 kg (65.04 lbs) Suspension (8) M10 threaded mounting points Height 16RU 685 mm (26.97") Width 432 mm (17.01") Depth 429 mm (16.89") Weight Net 24.4 kg (53.79 lbs)
QuickSmartDSP features best-in-class processing, EV’s signature single-knob user interface, and intuitive menu navigation via LCD.
0.00€
FBT Evo2MaxX 4AC (Evo2MaxX 4AC)
400W + 100W RMS 130dB SPL Processed Active Speaker 2-way, bi-amplified, bass reflex design cabinet 320mm (12”) LF woofer with 64mm (2.5”) voice coil, custom made for FBT 25mm (1”) exit throat B&C HF compression driver Frequency response from 50Hz to 20 kHz Biamped: 400w RMS LF, 100w RMS HF, Class D power amplifiers with switch mode power supplies Digital Signal Processor with 4 Equalization Presets Control Panel: features balanced XLR/Jack input and XLR link out, Volume, EQ Presets, HP Filter, 3 status LED indicators 90°H x 60°V Constant Directivity Horn Sturdy gas-injected polypropylene molded enclosure with two integrated handles and Stage Floor Monitor taper 4 x M10 suspension points, 35mm (1⅜”) top-hat speaker stand socket, wall bracket mount flange plate Enclosure suitable for stacking Extremely light, Net Wt. only 15.6kg (34.4 lb)
Prikazana cena je za komad. Evo2MaxX 4a 400W + 100W RMS 130dB SPL Processed Active Speaker
579.00€
FBT HiMaxX 40a (HiMaxX 40a)
Processed Active Monitor 2-Way Bi-Amp Processed Active Monitor System > 500W Class D (LF) + 150W Class G (HF) Power Amplifiers. Comparing with the FBTMaxX 4a, these new built in-amplifiers offer an increased power capacity of +200W for the LF woofer and +50W for the HF driver. Peak power has almost doubled with up to 1000W for the LF woofer > +4dB more SPL (@ 1mt / music signal), thanks to the higher power handling, to a woofer offering a lower power compression and to a more sophisticated limiting circuit. > Increased efficiency with the addition of the very latest switch mode power supply and a Class G amplifier for the HF compression driver > Excellent WEIGHT/POWER ratio. HiMaxX 40a weighs just a bit more than the FBTMaxX 4a while the total power capacity has almost doubled > New FBT proprietary designed 12” (3” VC) B&C® custom made neodymium magnet woofer, has a more efficient ventilation system resulting in a 1.5dB reduction of power compression and a more rigid cone for increased reliability. The internal coil has 75mm (3”) diameter for greater power handling and reliability > New B&C® 1” (1.7” VC) HF compression driver with shorting copper cup for improved extension and efficiency in the mid-frequencies and lower distortion. The coil measures 44mm (1.7”) diameter and the driver is coupled to a 90°H x 60°V constant directivity horn > New FBT proprietary gas-injection polypropylene moulded asymmetrical trapezoidal design enclosure of extremely high quality, lightness, strength, resistance, flexibility and applications. The total volume increases +5Lt of load to the woofer, maintaining the same width and height of the FBTMaxX4 model, whilst producing a more powerful bass response. The reflex tuning ports are newly designed and optimised to reduce turbulences and compression. > The newly designed control panel features: - Combined Gain and Volume functions in the same rotary potentiometer offer easier and quicker control and provide an improved dynamic range and S/N ratio at the input stage - MIC/LINE input selector with Peak led - 2 independent input channels (1 x XLR/Jack, 1 x AUX L/R Cinch RCA with volume) to connect also external devices such as MP3, CD, PC, players. This feature may replace the use of an external mixer in such applications like: microphone music base - 3-band equalization (High/Mid/Low) - Ground Lift switch - 3 x Status LEDs: Power, Limiter, Protection HiMaxX 40a - Specifications Model HiMaxX 40a Configuration way 2 Built-in amplifier LF/HF W rms 500/150 Frequency response @-6dB 45Hz - 20KHz Low frequency woofer inch 1x12 - 3 coil High frequency driver inch 1 - 1.7coil Sensitivity (@1W/1m) dB 99 Maximum SPL dB 127 Dispersion H x V 90° x 60° Input impedance kOhm 22 Crossover frequency kHz 1,6 Input connectors XLR with loop RCA aux Power cord m/ft 5 / 16.4” Net dimensions (WxHxD) mm/inch 407x634x370 / 16.02x24.96x14.56 Net weight kg/Lb 17,9 / 39.46 Shipping dimensions (WxHxD) mm/inch 495x720x470 / 19.48x28.34x18.50 Shipping weight kg/Lb 20,5 / 45.19
Prikazana cena je za komad. INCREDIBLE!!! STRONG LIKE A HORSE!!! Processed Active Monitor 2-Way Bi-Amp Processed Active Monitor System > 500W Class D (LF) + 150W Class G (HF) Power Amplifiers. Comparing with the FBTMaxX 4a, these new built in-amplifiers offer an increased power capacity of +200W for the LF woofer and +50W for the HF driver. Peak power has almost doubled with up to 1000W for the LF woofer > +4dB more SPL (@ 1mt / music signal), thanks to the higher power handling, to a woofer offering a lower power compression and to a more sophisticated limiting circuit. > Increased efficiency with the addition of the very latest switch mode power supply and a Class G amplifier for the HF compression driver > Excellent WEIGHT/POWER ratio. HiMaxX 40a weighs just a bit more than the FBTMaxX 4a while the total power capacity has almost doubled > New FBT proprietary designed 12” (3” VC) B&C® custom made neodymium magnet woofer, has a more efficient ventilation system resulting in a 1.5dB reduction of power compression and a more rigid cone for increased reliability. The internal coil has 75mm (3”) diameter for greater power handling and reliability > New B&C® 1” (1.7” VC) HF compression driver with shorting copper cup for improved extension and efficiency in the mid-frequencies and lower distortion. The coil measures 44mm (1.7”) diameter and the driver is coupled to a 90°H x 60°V constant directivity horn > New FBT proprietary gas-injection polypropylene moulded asymmetrical trapezoidal design enclosure of extremely high quality, lightness, strength, resistance, flexibility and applications. The total volume increases +5Lt of load to the woofer, maintaining the same width and height of the FBTMaxX4 model, whilst producing a more powerful bass response. The reflex tuning ports are newly designed and optimised to reduce turbulences and compression. > The newly designed control panel features: - Combined Gain and Volume functions in the same rotary potentiometer offer easier and quicker control and provide an improved dynamic range and S/N ratio at the input stage - MIC/LINE input selector with Peak led - 2 independent input channels (1 x XLR/Jack, 1 x AUX L/R Cinch RCA with volume) to connect also external devices such as MP3, CD, PC, players. This feature may replace the use of an external mixer in such applications like: microphone music base - 3-band equalization (High/Mid/Low) - Ground Lift switch - 3 x Status LEDs: Power, Limiter, Protection HiMaxX 40a - Specifications Model HiMaxX 40a Configuration way 2 Built-in amplifier LF/HF W rms 500/150 Frequency response @-6dB 45Hz - 20KHz Low frequency woofer inch 1x12 - 3 coil High frequency driver inch 1 - 1.7coil Sensitivity (@1W/1m) dB 99 Maximum SPL dB 127 Dispersion H x V 90° x 60° Input impedance kOhm 22 Crossover frequency kHz 1,6 Input connectors XLR with loop RCA aux Power cord m/ft 5 / 16.4” Net dimensions (WxHxD) mm/inch 407x634x370 / 16.02x24.96x14.56 Net weight kg/Lb 17,9 / 39.46 Shipping dimensions (WxHxD) mm/inch 495x720x470 / 19.48x28.34x18.50 Shipping weight kg/Lb 20,5 / 45.19
1,249.00€
FBT HiMaxX 60a (HiMaxX 60a)
The study of a new cabinet in polypropylene, the use of a switch mode power supply and high efficiency power amplifiers and the redesign of the loudspeakers were the activities of the FBT R&D team aimed at maximizing the power weight ratio. This series comprises three models; two 2-way full-range enclosures in polypropylene, HiMaxX 40 (12”+1”) and HiMaxX 60 (15’’+1.4”), plus a compact 18’’ bandpass SUB in birch plywood (HiMaxX 100Sa). Compact and light weight, HiMaxX brilliantly solve all the most demanding requests from buffs, musicians and professionals looking for powerful, versatile and very high quality loudspeaker enclosures. Ideal for live and sound reinforcement applications requiring ease of transport, they are also suited to fixed installations, thanks to the cabinets’ format and optional accessories. 2-way, bi-amplified in Bass- Reflex design B&C custom designed 380 mm (15”) neodymium woofer with 75 mm (3”) voice coil B&C 36 mm (1.4”) compression driver with 64 mm (2.5”) voice coil 700Wrms PWM LF power amplifier 200Wrms Class G HF power amplifier Switch mode power supply for an excellent ratio weight/power Analog signal processor limiter Completely redesigned control panel with: XLR Input and XLR Link Gain and Volume functions in a single potentiometer to improve user friendliness improving the dynamic range and input signal/noise ratio 3-band EQ (Bass, Mid, High) Ground-lift Diagnostic LED 90°H x 60°V constant directivity horn 4 x M10 anchoring points, 35 mm ø (1.38”) top-hat for speaker stand placement and wall bracket mount flange, 2 integrated carrying handles
Prikazana cena je za komad. PROCESSED ACTIVE SPEAKER 1100W + 250W RMS - 135DB SPL With the new HiMaxX series, FBT establishes a reference point on the scenario of 12” and 15” enclosures in polypropylene for sound reinforcement, introducing performance and technical content of a standard unthinkable up until now. FBT HiMaxX takes its place alongside the FBTMaxX series, exalting all the technical features.
1,490.00€
FBT J15A (J15A)
FBT J-Series J15a Active Full Range Speaker - 15"+1" Driver, biamped switched mode amp, 350W LF + 100W HF thomann RMS class-D, 48Hz-20kHz, 90° x 60°, internal DSP with 4 switchable EQ presets, wedge angles, XLR in/out, volume, 2x M10 flying points, 35mm pole mount, black plastic housing. Dimensions: 410 x 663 x 387mm. Weight: 14 kg
Prikazana cena je za komad. FBT J-Series J15a Active Full Range Speaker - 15"+1" Driver, biamped switched mode amp, 350W LF + 100W HF thomann RMS class-D, 48Hz-20kHz, 90° x 60°, internal DSP with 4 switchable EQ presets, wedge angles, XLR in/out, volume, 2x M10 flying points, 35mm pole mount, black plastic housing. Dimensions: 410 x 663 x 387mm. Weight: 14 kg
579.00€
FBT J8A (J8A)
BT J-Series J8a Active Full Range Speaker - 8"+1" Driver, biamped switched mode amp, 200W LF + 50W HF thomann RMS class-D,60Hz-20kHz, 90° x 60°, internal DSP with 2 switchable EQ presets, wedge angles, XLR in/out, volume, 2x M5 flying points, 25mm pole mount, black plastic housing. Dimensions: 255 x 415 x 245mm. Weight: 8,2 kg,
Prikazana cena je za komad. FBT J-Series J8a Active Full Range Speaker - 8"+1" Driver, biamped switched mode amp, 200W LF + 50W HF thomann RMS class-D,60Hz-20kHz, 90° x 60°, internal DSP with 2 switchable EQ presets, wedge angles, XLR in/out, volume, 2x M5 flying points, 25mm pole mount, black plastic housing. Dimensions: 255 x 415 x 245mm. Weight: 8,2 kg, Optional cover 178863
379.00€
FBT Jolly 15BA (Jolly 15BA)
Specifications 2-way bi-am amplified system in Bass-Reflex 380mm (15”) high efficiency and high excursion custom speaker 25mm (1”) custom compression driver 300Wrms MOS-FET amplifier for low frequencies 50W rms class AB amplifier for high frequencies 90°H x 60°V constant directivity horn ADAP® (Advanced Dynamic Active Protection) processor to limit overload Polypropylene enclosure with integrated handle, 2 x M10 anchoring points, 35mm (1.38”) pole mount socket
Prikazana cena je za komad. Jolly 15B A / Processed Active Monitor 300W + 50W - 127dB SPL Player video storage 300W + 50W - 127dB SPL Processed Active Monitor Specifications 2-way bi-am amplified system in Bass-Reflex 380mm (15”) high efficiency and high excursion custom speaker 25mm (1”) custom compression driver 300Wrms MOS-FET amplifier for low frequencies 50W rms class AB amplifier for high frequencies 90°H x 60°V constant directivity horn ADAP® (Advanced Dynamic Active Protection) processor to limit overload Polypropylene enclosure with integrated handle, 2 x M10 anchoring points, 35mm (1.38”) pole mount socket Download datasheetDownload user manual
549.00€
FBT Mitus 115A (Mitus 115A)
The Mitus 115a - 600W + 300W 133DB SPL PROCESSED ACTIVE SPEAKER The MITUS 115 A is a 2-way design active speaker, with a 15” neodymium magnet woofer and a 1.7” VC HF compression driver, both by B&C, mounted on a 80°H x 50°H rotatable CD horn. The Class D amplifiers with switch mode power supply provide 600w RMS LF and 300w RMS HF. The Mitus 112A features a DSP with 8 factory presets to provide the best performance for numerous applications. The New MITUS 115 A features a Baltic birch plywood cabinet, with a heavy duty grille and with a dust/moisture protection foam backing.Completely Made In Italy THE FBT MITUS - Setting a New Milestone Advancing the concept of line arrays in terms of power, performance, weight, flexibility and ease of use, the new MITUS sound reinforcement series is the true result of our experience and passion for excellence. A comprehensive range of line array systems, speakers, subwoofers and monitor systems, available in active or passive design, to deliver the finest sound in all applications, from touring to permanent installation. High quality B&C neodymium magnet woofers, custom manufactured for FBT. The latest generation of B&C compression drivers. High efficiency Class D power amplifiers modules with switch mode power supplies, Neutrik Powercon IN and LINK OUT power receptacles DSP with A/D-D/A low noise converters providing crossover, equalization, system protection along with 8 selectable presets. Die-cast aluminum chassis. New aluminum die-cast carrying handles. Heavy duty metal grille with anti-resonance spacers and FBT exclusive synthetic cloth. 5 different configurations allowed, suspended or ground stacked. A wide range of accessories makes the MITUS range extremely flexible for live or permanent installations. FEATURES 2-way, bi-amplified, bass-reflex design 380 mm (15”) B&C neodymium magnet woofer with 75 mm (3”) voice coil 25 mm (1”) exit B&C neodymium magnet HF driver with 44 mm (1.7’’) voice coil with 80°H x 50°V rotatable horn Class D built-in amplifiers, 600WRMS to the LF and 300WRMS to the HF, switch mode power supply Frequency response from 46Hz to 20KHz Control panel with XLR input and link, volume, presets, HP-filter, ground-lift 15 mm (5/8”) birch plywood enclosure, scratch resistant black paint finish Eight M10 fly points, 35 mm (1.38’’) speaker stand socket and two FBT design aluminium handles Ideal for live sound reinforcement applications as front of house main PA. Also suited for permanent installations Very lightweight, only 28Kg SPECSIFICATION Depth : 16.6 in Depth : 421 mm Height : 29.5 in Height : 750 mm Width : 16.7 in Width : 425 mm Product Weight : 61.7 lbs Product Weight : 28 kg Shipping Weight : 67.3 lbs Shipping Weight : 30.5 kg Current Draw : 640 Watt SPL Max : 133 dB AC Voltage : 120 Volts Frequency Response : 46Hz-20kHz Power Output : 600w RMS LF, 300w RMS HF
Prikazana cena je za komad. The Mitus 115a - 600W + 300W 133DB SPL PROCESSED ACTIVE SPEAKER
1,499.00€
FBT ProMaxX 12A (ProMaxX 12A)
FBT ProMaxx 12a Active Full Range Speaker - 12"+1" B&C neodymium drivers, biamped switched mode amp, 600W LF + thomann 300W HF, 48Hz-20kHz, 90° x 60°, internal DSP with 8 switchable EQ presets, 3 wedge angles (12°, 40° and 55°), XLR in/out, volume, HP filter, ground lift switch, 2x M10 flying points, 35mm pole mount, black plastic housing. Dimensions: 402 x 644 x thomann 345mm. Weight: 15kg
Prikazana cena je za komad. FBT ProMaxx 12a Active Full Range Speaker - 12"+1" B&C neodymium drivers, biamped switched mode amp, 600W LF + thomann 300W HF, 48Hz-20kHz, 90° x 60°, internal DSP with 8 switchable EQ presets, 3 wedge angles (12°, 40° and 55°), XLR in/out, volume, HP filter, ground lift switch, 2x M10 flying points, 35mm pole mount, black plastic housing. Dimensions: 402 x 644 x thomann 345mm. Weight: 15kg
899.00€
FBT ProMaxX 14A (ProMaxX 14A)
2-way, bi-amplified, bass reflex design cabinet NEW! 355 mm (14") LF neodymium magnet woofer with 75mm (3") voice coil, custom made for FBT by B&C 35 mm (1.4'') exit throat B&C HF neodymium magnet compression driver with 64 mm (2.5") voice coil Frequency Response from 45Hz - 20 kHz Biamped: 600W RMS LF, 300W RMS HF, Class D power amplifiers with switch mode power supplies Digital Signal Processor with 8 equalization preset Control Panel: features XLR input and link out, Volume, EQ Presets, HP Filter, Ground-Lift Switch 90°H x 60°V Constant Directivity Horn Compact Dimensions: ProMaxX 14a uses the same size gas-injected polypropylene molded enclosure as the ProMaxX 12a, but features our New 14" LF Woofer for more low frequency SPL Dual Purpose: Front of House or Stage Floor Monitor: with 12°, 40° and 55° monitoring angles 2 x M10 suspension points, 35 mm (1,3/8") top-hat speaker stand socket, wall bracket mount flange plate Extremely light, only 16.5 kg ( 36.4 lbs.) FEATURES 2-way bi-amplied bassreex design cabinet Sturdy gas-injected polypropylene molded enclosure 600w RMS LF, 300w RMS HF, Class D power ampliers 14" B&C neodymium woofer with 3" voice coil 1.4" exit throat B&C neodymium compression driver with 2.5" voice coil 90° H x 60° V Constant Directivity Horn Digital Signal Processor with 8 EQ Presets Control Panel with XLR HPlter, Ground liftswitc SPL capability: 135.5dB 2 x M10 y points Dual purpose: Front of House or Stage Floor Monitor Completely Manufactured in Ital
Prikazana cena je za komad. 2-way, bi-amplified, bass reflex design cabinetNEW! 355 mm (14") LF neodymium magnet woofer with 75mm (3") voice coil, custom made for FBT by B&C35 mm (1.4'') exit throat B&C HF neodymium magnet compression driver with 64 mm (2.5") voice coilFrequency Response from 45Hz - 20 kHzBiamped: 600W RMS LF, 300W RMS HF, Class D power amplifiers with switch mode power suppliesDigital Signal Processor with 8 equalization presetControl Panel: features XLR input and link out, Volume, EQ Presets, HP Filter, Ground-Lift Switch90°H x 60°V Constant Directivity HornCompact Dimensions: ProMaxX 14a uses the same size gas-injected polypropylene molded enclosure as the ProMaxX 12a, but features our New 14" LF Woofer for more low frequency SPLDual Purpose: Front of House or Stage Floor Monitor: with 12°, 40° and 55° monitoring angles2 x M10 suspension points, 35 mm (1,3/8") top-hat speaker stand socket, wall bracket mount flange plateExtremely light, only 16.5 kg ( 36.4 lbs.) FEATURES2-way bi-amplied bassreex design cabinetSturdy gas-injected polypropylene molded enclosure600w RMS LF, 300w RMS HF, Class D powerampliers14" B&C neodymium woofer with 3" voice coil1.4" exit throat B&C neodymium compression driverwith 2.5" voice coil90° H x 60° V Constant Directivity HornDigital Signal Processor with 8 EQ PresetsControl Panel with XLR HPlter, Ground liftswitcSPL capability: 135.5dB2 x M10 y pointsDual purpose: Front of House or Stage Floor MonitorCompletely Manufactured in Ital
1,069.00€
FBT VERTUS CLA 208SA (VERTUS CLA 208SA)
Active subwoofer in bass-reflex design 2 x 8" (200mm) custom neodymium, high-excursion woofer with 2" (50 mm) voice coil 50Hz to 180Hz frequency response Class D 600W RMS amplifier with switch mode power supply DSP processor with 4 available presets Control panel with combo XLR/Jack stereo input and link, XLR Hi-pass out stereo, volume, presets, 0°-180° phase switch, status LED Neutrik POWERCONN input and link 15mm birch plywood enclosure with anti-scratch paint finish, stackable M20 stand adapter, 2 integrated handles, front hardware to sustain CLA206LA modules Suitable for low frequency extension and reinforcement of the CLA604A array, especially for live performance Vertus is also available in white colour CLA 208SA is a 2 x 8" active subwoofer in bass-reflex design and birch ply enclosure. The internal Class D amplifier delivers 600W and is matched with a switch mode power supply and a DSP processor with filtering functions, equalization and speaker protection. Created with the idea of extending the CLA608A's low frequency performance in live applications, the CLA208SA serves as the base support for the CLA604A column speaker which can either be frontally mounted to the sub, as well as fixed upon the optional stand through the M20 socket on the upside of the sub. The CLA208SA subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. CLA system features: High-level sound quality from 50Hz to 20kHz expressly developed for live performance Long distance sound projection and better SPL distribution towards the audience Great and dynamic power performance thanks to tri-amplification system Lightweight and easy to carry Design and elegance for an easy integration even in the most demanding installations Very compact dimensions enable the listener to concentrate on sound and not on speakers! High horizontal dispersion
FBT VERTUS CLA was created with the thought of integrating professional line array technology in an extremely compact and elegant speaker column.
849.00€
FBT VERTUS CLA 604 A (VERTUS CLA 604 A)
FBT - VERTUS CLA 604A VERTUS CLA604A 400W + 100W RMS 125DB SPL COLUMN ACTIVE LINE ARRAY · 2-way bi-amplified Line Array Column · 6 x 4” (100mm) custom woofer with 1” (25 mm) voice coil · 4 x 1” (25mm) neodymium dome tweeter on waveguide · 130Hz to 20KHz frequency response · Class D 400Wrms amplifier for LF and 100Wrms for HF with switch mode power supply · DSP processor with 4 available equalization presets · Control panel with volume, presets, HP filter, Mic-Line, status LED · XLR input and Neutrik POWERCONN supply input at the lower part of the column; XLR link and Neutrik POWERCONN loop output at the higher part, in order to hide each connection cable · 100°H x 20°V dispersion · Extruded-aluminum powder-coated cabinets. Superior latching system, enables the extension of the length of the line array by adding CLA604A modules for increased modularity of the system. · Possibility to angle the columns of +/- 30° on a horizontal plane · Ideal for both live applications, assisted by the CLA 208SA active subwoofer, as well as for fixed installation · Easily expandable for a total power of 6600W (stereo system composed of 3 x CLA604A and 3 x CLA208SA) · Very light and easy to carry High-level sound quality from 50Hz to 20kHz expressly developed for live performance - Long distance sound projection and better SPL distribution towards the audience - Great and dynamic power performance thanks to tri-amplification system - Lightweight and easy to carry - Design and elegance for an easy integration even in the most demanding installations - Very compact dimensions enable the listener to concentrate on sound and not on speakers! - High horizontal dispersion FBT VERTUS CLA was created with the thought of integrating professional line array technology in an extremely compact and elegant speaker column. Compared to the traditional two-way speakers, the sound is distributed much more evenly throughout the audience, both in outdoor and in indoor environments acoustically difficult or reverberating as well. The CLA cylindrical wave front boasts the pleasant effect of present and precise forwardly projected sound. Even acoustic feedback towards microphones is reduced. VERTUS CLA is a light and compact modular line array system created for both live and fixed installations, comprised by two products: - CLA 604a: bi-amp two-way active column speakers 400 + 100W RMS - CLA 208Sa: active subwoofer 600W RMS VERTUS CLA is a true professional line array system that can satisfy the musician looking for a compact PA solution, easily to carry, modular, ready to use in just minutes with no-compromise quality. It is capable of being integrated into any environment or installation requiring high-quality sound and controlled directional characteristics.
Prikazana cena je za komad. VERTUS CLA604A 400W + 100W RMS 125DB SPL COLUMN ACTIVE LINE ARRAY
949.00€
FBT Vertus Line array active system (Vertus Line array active system)
Completely made in Italy The Vertus system comprises of: 2 x CLA 604a active column speakers 2 x CLA 208Sa active subwoofers 2 x VT-S604 speaker poles 2 x KMS220 Adaptors 4 x Neutrik Powercon Cables This system is easily expandable with the addition of further CLA604a’s and CLA208SAa’s Very light and easy to carry Features The internal Class D amplifier delivers 600W in the CLA 208Sa and 400W + 100W in the CLA 604a. These are matched with a switch mode power supply and a DSP processor with filtering functions, equalization and speaker protection. Created with the idea of extending the CLA604a’s low frequency performance in live applications, the CLA208Sa serves as the base support for the CLA604a column speaker which can either be frontally mounted to the sub, as well as fixed upon the optional stand through the M20 socket on the upside of the sub. The CLA208Sa subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. QSL’s Verdict “The Vertus system (the CLA208 combined with the CLA604) is a stunning system with excellent dispersion and can be used in a variety of configurations.” Specifications Vertus CLA208Sa 600W RMS 129dB SPL Processed Active Subwoofer · Active subwoofer in bass-reflex design · 2 x 8” (200mm) custom neodymium, high-excursion woofer with 2” (50 mm) voice coil · 50Hz to 180Hz frequency response · Class D 600W RMS amplifier with switch mode power supply · DSP processor with 4 available presets · Control panel with combo XLR/Jack stereo input and link, XLR Hi-pass out stereo, volume, presets, 0°-180° phase switch, status LED · Neutrik POWERCONN input and link · 15mm birch plywood enclosure with anti-scratch paint finish, stackable · M20 stand adapter, 2 integrated handles, front hardware to sustain CLA206LA modules · Suitable for low frequency extension and reinforcement of the CLA604A array, especially for live performance Vertus CLA604A 400W + 100W RMS 125dB SPL Column Active Line Array · 2-way bi-amplified Line Array Column · 6 x 4” (100mm) custom woofer with 1” (25 mm) voice coil · 4 x 1” (25mm) neodymium dome tweeter on waveguide · 130Hz to 20KHz frequency response · Class D 400Wrms amplifier for LF and 100Wrms for HF with switch mode power supply · DSP processor with 4 available equalization presets · Control panel with volume, presets, HP filter, Mic-Line, status LED · XLR input and Neutrik POWERCONN supply input at the lower part of the column; XLR link and Neutrik POWERCONN loop output at the higher part, in order to hide each connection cable · 100°H x 20°V dispersion · Extruded-aluminum powder-coated cabinets. Superior latching system, enables the extension of the length of the line array by adding CLA604A modules for increased modularity of the system. · Possibility to angle the columns of +/- 30° on a horizontal plane · Ideal for both live applications, assisted by the CLA 208SA active subwoofer, as well as for fixed installation · Easily expandable for a total power of 6600W (stereo system composed of 3 x CLA604A and 3 x CLA208SA) · Very light and easy to carry
Snizeno sa 3499eura Completely made in Italy The Vertus system comprises of:2 x CLA 604a active column speakers 2 x CLA 208Sa active subwoofers 2 x VT-S604 speaker poles 2 x KMS220 Adaptors 4 x Neutrik Powercon Cables This system is easily expandable with the addition of further CLA604a’s and CLA208SAa’s Very light and easy to carry Features The internal Class D amplifier delivers 600W in the CLA 208Sa and 400W + 100W in the CLA 604a. These are matched with a switch mode power supply and a DSP processor with filtering functions, equalization and speaker protection. Created with the idea of extending the CLA604a’s low frequency performance in live applications, the CLA208Sa serves as the base support for the CLA604a column speaker which can either be frontally mounted to the sub, as well as fixed upon the optional stand through the M20 socket on the upside of the sub. The CLA208Sa subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL. QSL’s Verdict “The Vertus system (the CLA208 combined with the CLA604) is a stunning system with excellent dispersion and can be used in a variety of configurations.” Specifications CLA 208Sa Vertus CLA208Sa 600W RMS 129dB SPL Processed Active Subwoofer · Active subwoofer in bass-reflex design · 2 x 8” (200mm) custom neodymium, high-excursion woofer with 2” (50 mm) voice coil · 50Hz to 180Hz frequency response · Class D 600W RMS amplifier with switch mode power supply · DSP processor with 4 available presets · Control panel with combo XLR/Jack stereo input and link, XLR Hi-pass out stereo, volume, presets, 0°-180° phase switch, status LED · Neutrik POWERCONN input and link · 15mm birch plywood enclosure with anti-scratch paint finish, stackable · M20 stand adapter, 2 integrated handles, front hardware to sustain CLA206LA modules · Suitable for low frequency extension and reinforcement of the CLA604A array, especially for live performance CLA 604a Vertus CLA604A 400W + 100W RMS 125dB SPL Column Active Line Array · 2-way bi-amplified Line Array Column · 6 x 4” (100mm) custom woofer with 1” (25 mm) voice coil · 4 x 1” (25mm) neodymium dome tweeter on waveguide · 130Hz to 20KHz frequency response · Class D 400Wrms amplifier for LF and 100Wrms for HF with switch mode power supply · DSP processor with 4 available equalization presets · Control panel with volume, presets, HP filter, Mic-Line, status LED · XLR input and Neutrik POWERCONN supply input at the lower part of the column; XLR link and Neutrik POWERCONN loop output at the higher part, in order to hide each connection cable · 100°H x 20°V dispersion · Extruded-aluminum powder-coated cabinets. Superior latching system, enables the extension of the length of the line array by adding CLA604A modules for increased modularity of the system. · Possibility to angle the columns of +/- 30° on a horizontal plane · Ideal for both live applications, assisted by the CLA 208SA active subwoofer, as well as for fixed installation · Easily expandable for a total power of 6600W (stereo system composed of 3 x CLA604A and 3 x CLA208SA) · Very light and easy to carry User Manual Download pdf
2,799.00€
FBT X LITE 10A (X LITE 10A)
Processed Active Speaker 1000W - 126dB SPL 2-way bi-amplified bass reflex FBT Custom 250mm (10”) LF woofer with 50mm (2”) voice coil FBT 25mm (1”) throat /35mm (1.4”)voice coil HF compression driver 58Hz to 20KHz Frequency Response 90° H x 60° V constant directivity horn 30° monitor taper features: Polypropylene molded enclosure designed to eliminate unwanted resonances Custom FBT Speakers with high linear excursion capability and efficiency Compression driver with 25mm (1”) throat and 35mm (1.4”) voice coil 1000W, 2-channel amplifier in Class D for LF and in Class AB for HF with a high dynamics response for a pleasant sound at high volume. Universal switching mode power supply 100-240VAC DSP with 4 EQ presets designed to tailor the sound of the speaker to various applications and installation environments Advanced algorithms for filtering and equalization which alter the dynamics of the low frequency energy according to the selected preset, allowing distortion-free high SPL performance Control panel with XLR input and link out , 6.3mm jack stereo input with volume , stereo RCA input with volume , XLR output selector coupled with stereo / mono , HP filter on / off, mic / line , DSP preset selector Integrated mixer with two stereo channels , one channel mic / line input and an output coupled XLR mono / stereo to revive the other channel of the stereo signal to another speaker. Integrated handles , M10 rigging points for suspended installation, 35mm stand socket and monitor taper, all included to make the speaker adaptable to any application The presence of 4 presets managed by DSP allows you to modify the response of the speaker in a much more accurate way compared to standard tone controls. In addition, each preset has been designed and optimized in an anechoic chamber to deliver the best possible performance for each application. ORIGINAL / LIVE: the ideal preset for live sound reinforcement FLOOR / VOCAL: a preset to transform your X-LITE cabinet for use as a stage monitor or for vocals CLUB: a special preset to deliver a rich, deep bass response that stays easy on listener’s ears DJ: a preset designed to bring out the best in electronic dance music Configuration: 2 way Built-in amplifier peak LF/HF: 800/200 W Frequency response: 58Hz - 20KHz 6dB Low Frequency woofer: 10 - 2 coil inch High Frequency driver: 1 - 1.4 coil inch Maximum SPL cont/peak: 126 dB Dispersion: 90° - 60° HxV Input impedance: 22 Kohm Input connector: XLR with loop Power cord: 5 / 16.4 m/ft Net Dimension (WxHxD): 315x550x315 / 12.40x21.65x12.40 mm/inch Net Weight: 12 / 26 Kg/lb Transport Dimension (WxHxD): 380x630x380 / 14.96x24.80x14.96 mm/inch Transport Weight: 14.5/31 Kg/lb
Prikazana cena je za komad. Your music, your performance or your installation can count on FBT’s new X-LITE series of portable powered speaker systems. Constructed out of polypropylene enclosures, the X-LITE series features a sleek design including 3 x carrying handles and 4 x M10 flying points. In addition, the full front grille provides complete protection, delivering elegance and sturdiness. Features include built-in Class D amplifier modules providing an amazing 1000W of power to satisfy the most demanding applications, whilst the user-friendly DSP allows 4 x EQ preset selection to perfectly tailor the performance of your X-LITE to your sound requirements. In addition, the X-LITE series is truly versatile, offering a professional control panel that allows you to set up configurations with or without subs. Even better – if you do want to extend the X-LITE low frequency response, you can do so with the dedicated X-SUB 18” powered subwoofer.
409.00€
FBT X LITE 12A (X LITE 12A)
Processed Active Speaker 1000W - 127dB SPL 2-way bi-amplified bass reflex FBT Custom 320mm (12”) LF woofer with 50mm (2”) voice coil FBT 25mm (1”) throat /35mm (1.4”)voice coil HF compression driver 50Hz to 20KHz Frequency Response 90° H x 60° V constant directivity horn 30° or 45° monitor taper features: Polypropylene molded enclosure designed to eliminate unwanted resonances Custom FBT Speakers with high linear excursion capability and efficiency Compression driver with 25mm (1”) throat and 35mm (1.4”) voice coil 1000W, 2-channel amplifier in Class D for LF and in Class AB for HF with a high dynamics response for a pleasant sound at high volume. Universal switching mode power supply 100-240VAC DSP with 4 EQ presets designed to tailor the sound of the speaker to various applications and installation environments Advanced algorithms for filtering and equalization which alter the dynamics of the low frequency energy according to the selected preset, allowing distortion-free high SPL performance Control panel with XLR input and link out , 6.3mm jack stereo input with volume , stereo RCA input with volume , XLR output selector coupled with stereo / mono , HP filter on / off, mic / line , DSP preset selector Integrated mixer with two stereo channels , one channel mic / line input and an output coupled XLR mono / stereo to revive the other channel of the stereo signal to another speaker. Integrated handles , M10 rigging points for suspended installation, 35mm stand socket and monitor taper, all included to make the speaker adaptable to any application The presence of 4 presets managed by DSP allows you to modify the response of the speaker in a much more accurate way compared to standard tone controls. In addition, each preset has been designed and optimized in an anechoic chamber to deliver the best possible performance for each application. ORIGINAL / LIVE: the ideal preset for live sound reinforcement FLOOR / VOCAL: a preset to transform your X-LITE cabinet for use as a stage monitor or for vocals CLUB: a special preset to deliver a rich, deep bass response that stays easy on listener’s ears DJ: a preset designed to bring out the best in electronic dance music Configuration: 2 way Built-in amplifier LF/HF: 800/200 W RMS Frequency response: 50 Hz - 20KHz 6dB Low Frequency woofer: 12 - 2 coil inch High Frequency driver: 1 - 1.4 coil inch Maximum SPL cont/peak: 127 dB Dispersion: 90°X60° HxV Input impedance: 22 Kohm Input connector: XLR with loop Power cord: 5 / 16.4 m/ft Net Dimension (WxHxD): 370x640x370 / 14.56x25.19x14.56 mm/inch Net Weight: 15 / 33 Kg/lb Transport Dimension (WxHxD): 450x450x720 / 17.71x17.71x28.34 mm/inch Transport Weight: 18.5/40 Kg/lb
Prikazana cena je za komad. Your music, your performance or your installation can count on FBT’s new X-LITE series of portable powered speaker systems. Constructed out of polypropylene enclosures, the X-LITE series features a sleek design including 3 x carrying handles and 4 x M10 flying points. In addition, the full front grille provides complete protection, delivering elegance and sturdiness. Features include built-in Class D amplifier modules providing an amazing 1000W of power to satisfy the most demanding applications, whilst the user-friendly DSP allows 4 x EQ preset selection to perfectly tailor the performance of your X-LITE to your sound requirements. In addition, the X-LITE series is truly versatile, offering a professional control panel that allows you to set up configurations with or without subs. Even better – if you do want to extend the X-LITE low frequency response, you can do so with the dedicated X-SUB 18” powered subwoofer.
469.00€
FBT X LITE 15A (X LITE 15A)
Processed Active Speaker 1000W - 128dB SPL 2-way bi-amplified bass reflex FBT Custom 380mm (15”) LF woofer with 64mm (2.5”) voice coil FBT 25mm (1”) throat /35mm (1.4”)voice coil HF compression driver 42Hz to 20KHz Frequency Response 90° H x 60° V constant directivity horn 30° or 45° monitor taper n features: Polypropylene molded enclosure designed to eliminate unwanted resonances Custom FBT Speakers with high linear excursion capability and efficiency Compression driver with 25mm (1”) throat and 35mm (1.4”) voice coil 1000W, 2-channel amplifier in Class D for LF and in Class AB for HF with a high dynamics response for a pleasant sound at high volume. Universal switching mode power supply 100-240VAC DSP with 4 EQ presets designed to tailor the sound of the speaker to various applications and installation environments Advanced algorithms for filtering and equalization which alter the dynamics of the low frequency energy according to the selected preset, allowing distortion-free high SPL performance Control panel with XLR input and link out , 6.3mm jack stereo input with volume , stereo RCA input with volume , XLR output selector coupled with stereo / mono , HP filter on / off, mic / line , DSP preset selector Integrated mixer with two stereo channels , one channel mic / line input and an output coupled XLR mono / stereo to revive the other channel of the stereo signal to another speaker. Integrated handles , M10 rigging points for suspended installation, 35mm stand socket and monitor taper, all included to make the speaker adaptable to any application The presence of 4 presets managed by DSP allows you to modify the response of the speaker in a much more accurate way compared to standard tone controls. In addition, each preset has been designed and optimized in an anechoic chamber to deliver the best possible performance for each application. ORIGINAL / LIVE: the ideal preset for live sound reinforcement FLOOR / VOCAL: a preset to transform your X-LITE cabinet for use as a stage monitor or for vocals CLUB: a special preset to deliver a rich, deep bass response that stays easy on listener’s ears DJ: a preset designed to bring out the best in electronic dance music Code: 38768 Built-in amplifier LF/HF: 800/200 W RMS Frequency response: 42Hz - 20KHz 6dB Low Frequency woofer: 15 - 2.5 coil inch High Frequency driver: 1 - 1.4 coil inch Maximum SPL cont/peak: 128 dB Dispersion: 90°x60° HxV Input impedance: 22 Kohm Input connector: XLR with loop, jack ST, RCA ST Power cord: 5 / 16.4 m/ft Net Dimension (WxHxD): 440x735x440 / 17.32x28.93x17.32 mm/inch Net Weight: 19/41 Kg/lb Transport Dimension (WxHxD): 515x785x475 / 20.27x30.90x18.70 mm/inch Transport Weight: 22.5 / 49 Kg/lb
Your music, your performance or your installation can count on FBT’s new X-LITE series of portable powered speaker systems. Constructed out of polypropylene enclosures, the X-LITE series features a sleek design including 3 x carrying handles and 4 x M10 flying points. In addition, the full front grille provides complete protection, delivering elegance and sturdiness. Features include built-in Class D amplifier modules providing an amazing 1000W of power to satisfy the most demanding applications, whilst the user-friendly DSP allows 4 x EQ preset selection to perfectly tailor the performance of your X-LITE to your sound requirements. In addition, the X-LITE series is truly versatile, offering a professional control panel that allows you to set up configurations with or without subs. Even better – if you do want to extend the X-LITE low frequency response, you can do so with the dedicated X-SUB 18” powered subwoofer.
579.00€
MACKIE SRM 450 V2 (SRM 450 V2)
The Mackie SRM450 v2 Active Speaker puts your focus on your performance instead of the distraction of constant EQ and level tweaks. While live sound can sometimes seem like a wild, uncaged animal, with the SRM450 Portable Active Loudspeaker, Mackie has created technology to help tame the beast. Thanks to the Mackie SRM450 v2 speaker's all-new design—from adding new amps and transducers to a new lightweight power supply—the SRM450 v2 surpasses the performance of the original SRM450 to deliver pure studio monitor sound at more powerful, full-on loudspeaker levels. Mackie has also managed to keep the SRM450 v2 affordable for musicians despite a complete redesign from the inside out. 2-way biamplified, optimized Active loudspeaker system High-output precision titanium compression driver Neodymium long-throw low-frequency transducer with 3" voice coil Servo Feedback controlled woofer for tight low-end punch 300W Class D, Fast Recovery LF amp/100W HF amp Ultrawide, smooth dispersion via multi-cell horn aperture and HF waveguide Built-in phase-accurate 24dB Linkwitz-Riley electronic crossover Mackie Active Electronic time alignment, phase correction, and EQ for studio quality sound Mic/line input and pass-thru connector Lightweight for ultimate portability Flyable Pole-mountable
The Mackie SRM450 v2 Active Speaker puts your focus on your performance instead of the distraction of constant EQ and level tweaks. While live sound can sometimes seem like a wild, uncaged animal, with the SRM450 Portable Active Loudspeaker, Mackie has created technology to help tame the beast. Thanks to the Mackie SRM450 v2 speaker's all-new design—from adding new amps and transducers to a new lightweight power supply—the SRM450 v2 surpasses the performance of the original SRM450 to deliver pure studio monitor sound at more powerful, full-on loudspeaker levels. Mackie has also managed to keep the SRM450 v2 affordable for musicians despite a complete redesign from the inside out.
699.00€
MARTIN WISMAN ART 300A (ART 300A)
12-Inch Two-Way Active System FEATURES Two way active system Microphone input, Line input High quality plastic cabinet, waterproof and sunscreening APPLICATIONS Railway station, metro station Conference meeting room Outdoor venue SPECIFICATION System type: 2 –way12’’ Frequency response: 50hz-18khz Dispersion: 90°×60° Handling power: 500W peak Sensitivity: 98db Maximum spl: 122 db Suspension: yes Dimensions: 428×315.5×572mm Net weight: 21 kg
Proizvođač: MARTIN WISMAN ART 300A Dostupnost: Na stanju Šifra Proizvoda: 4943 Prikazana cena je za komad. 12-Inch Two-Way Active System FEATURES Two way active system Microphone input, Line input High quality plastic cabinet, waterproof and sunscreening APPLICATIONS Railway station, metro station Conference meeting room Outdoor venue SPECIFICATION System type: 2 –way12’’ Frequency response: 50hz-18khz Dispersion: 90°×60° Handling power: 500W peak Sensitivity: 98db Maximum spl: 122 db Suspension: yes Dimensions: 428×315.5×572mm Net weight: 21 kg
259.00€
MARTIN WISMAN ARTX 200A (ARTX 200A)
ARTX-200А System Active 2-Way full range 200W D class Woofer 10” Tweeter 1.34” Power 200W D class Impedance 4 Ohm Frequency Range 55Hz - 18KHZ Sensitivity 96dB(+/-2dB) Connector XLR / 6.35mm / RCA Mic Input Level ≤ 25 mV Line input / Output level 350 mV
Proizvođač: MARTIN WISMAN ARTX 200A Dostupnost: Na stanju Šifra Proizvoda: 1018 Prikazana cena je za komad. ARTX-200А System Active 2-Way full range 200W D class Woofer 10” Tweeter 1.34” Power 200W D class Impedance 4 Ohm Frequency Range 55Hz - 18KHZ Sensitivity 96dB(+/-2dB) Connector XLR / 6.35mm / RCA Mic Input Level ≤ 25 mV Line input / Output level 350 mV
179.00€
MARTIN WISMAN ARTX 300A (ARTX 300A)
ARTX-300А System Active 2-Way full range 550W D class Woofer 12” Tweeter 1.34” Power 550W D class Impedance 4 Ohm Frequency Range 50Hz - 18KHZ Sensitivity 98dB(+/-2dB) Connector XLR / 6.35mm / RCA Mic Input Level ≤ 25 mV Line input / Output level 350 mV
Prikazana cena je za komad. ARTX-300А System Active 2-Way full range 550W D class Woofer 12” Tweeter 1.34” Power 550W D class Impedance 4 Ohm Frequency Range 50Hz - 18KHZ Sensitivity 98dB(+/-2dB) Connector XLR / 6.35mm / RCA Mic Input Level ≤ 25 mV Line input / Output level 350 mV
189.00€
MARTIN WISMAN ARTX 500A (ARTX 500A)
ARTX-500А System Active 2-Way full range 650W D class Woofer 15” Tweeter 1.75” Power 650W D class Impedance 4 Ohm Frequency Range 40Hz - 18KHZ Sensitivity 99dB(+/-2dB) Connector XLR / 6.35mm / RCA Mic Input Level ≤ 25 mV Line input / Output level 350 mV
Prikazana cena je za komad. ARTX-500А System Active 2-Way full range 650W D class Woofer 15” Tweeter 1.75” Power 650W D class Impedance 4 Ohm Frequency Range 40Hz - 18KHZ Sensitivity 99dB(+/-2dB) Connector XLR / 6.35mm / RCA Mic Input Level ≤ 25 mV Line input / Output level 350 mV
269.00€
MARTIN WISMAN SPL 500A (SPL 500A)
SPL 500-A Portable Powered Speaker System Key Features: • High Impact Molded Polypropylene Enclosure • Big Dynamic Switch Mode Power Supply • Built- in High Efficient Class D Amplifier •15" Mid-Low Frequency Transducer • 1" Compression High Frequency Driver • 80°X 60°Coverage Pattern • Smooth Response With High Power Handling Capcity (long Term/Max), 124dB/l27dB • 5 lntegral Suspension Points • Complete Mounting Solutions The SPL-500A features a molded polypropylene enclosure that it inherently weather resistant. Amplification,mixing,and monitoring for electronic and electro-acoustic instruments. Martin Wisman audio used advanced program techniques to create the most successful and in fl uent-ial professional speaker system. High power, efficiency, lower distortion and great low frequency extension provide an unbelievable performance. SPL-500A can be used for live sound reinforcement, vocals, speech and music playback in entertainment, schools, pub, coffee shop and outdoor venues. Portability is one of the important factors for choice especially. For permanent suspension or attaching brackets, the SPL-500A also has two M8 inserts on the top and bottom, two on the side, for a total of 5. Technical Specification: Freq.Range(-1 OdB ): 45Hz-19kHz Freq .Response( -3d B): 55Hz-19kHz Rec.Hipass Frequency: 40Hz Max Calculated SPL: 127dB Horizontal Coverage: 80° Vertical Coverage: 60° Amplifier Power LF: 450W Amplifier Power HF: sow LF Transducer: 15"/65mm HF Transducer: 1 "/25mm Crossover Frequency: 2.2kHz Loop/Mix Out: XLR/M,Balanced AC Input: 220V-240 V,AC,50/60Hz, 750 Watts Dim (HXWXO): 740mmX475mmX400mm Net Weight: 22.5Kg Shipping Weight: 25.5Kg
Prikazana cena je za komad. SPL 500-APortable Powered Speaker System Key Features:• High Impact Molded Polypropylene Enclosure• Big Dynamic Switch Mode Power Supply• Built- in High Efficient Class D Amplifier•15" Mid-Low Frequency Transducer• 1" Compression High Frequency Driver• 80°X 60°Coverage Pattern• Smooth Response With High Power Handling Capcity (long Term/Max), 124dB/l27dB• 5 lntegral Suspension Points• Complete Mounting Solutions The SPL-500A features a molded polypropylene enclosure that it inherently weather resistant. Amplification,mixing,and monitoring for electronic and electro-acoustic instruments. Martin Wisman audio used advanced program techniques to create the most successful andin fl uent-ial professional speaker system. High power, efficiency, lower distortion and great low frequency extension provide an unbelievable performance. SPL-500A can be used for live sound reinforcement, vocals, speech and music playback in entertainment, schools, pub, coffee shop and outdoor venues. Portability is one of the important factors for choice especially. For permanent suspension or attaching brackets, the SPL-500A also has two M8 inserts on the top and bottom, two on the side, for a total of 5. Technical Specification:Freq.Range(-1 OdB ): 45Hz-19kHzFreq .Response( -3d B): 55Hz-19kHzRec.Hipass Frequency: 40HzMax Calculated SPL: 127dBHorizontal Coverage: 80°Vertical Coverage: 60°Amplifier Power LF: 450WAmplifier Power HF: sowLF Transducer: 15"/65mmHF Transducer: 1 "/25mmCrossover Frequency: 2.2kHzLoop/Mix Out: XLR/M,BalancedAC Input: 220V-240 V,AC,50/60Hz, 750 WattsDim (HXWXO): 740mmX475mmX400mmNet Weight: 22.5KgShipping Weight: 25.5Kg
489.00€
Martin Wisman SPX 160A (SPX 160A)
PRIKAZANA CENA JE ZA KOMAD!!!

Technical Specifications

Freq. Range (-10dB):    60Hz~20kHz
Freq. Response (-3dB):    75Hz~20kHz
Rec.Hipass Frequency:    50Hz
Max Calculated SPL:    117dB
Amplifier Power LF:    100W
Amplifier Power HF:    50W
LF Transducer:    8"
HF Transducer:    1"
Crossover Frequency:    3.5kHz
Loop/Mix Out:    XLR/M,Balanced
AC Input:    110/220 V, AC, 50/60Hz, 180 Watts
Dim (HxWxD):    435mm x 255mm x 245mm
Net Weight:    9.5Kg
Shipping Weight:    11Kg
Horizontal Coverage:    90º
Vertical Coverage:    60º

ŠALJEMO NA ADRESU!!!
PRIKAZANA CENA JE ZA KOMAD!!! Technical Specifications Freq. Range (-10dB): 60Hz~20kHz Freq. Response (-3dB): 75Hz~20kHz Rec.Hipass Frequency: 50Hz Max Calculated SPL: 117dB Amplifier Power LF: 100W Amplifier Power HF: 50W LF Transducer: 8" HF Transducer: 1" Crossover Frequency: 3.5kHz Loop/Mix Out: XLR/M,Balanced AC Input: 110/220 V, AC, 50/60Hz, 180 Watts Dim (HxWxD): 435mm x 255mm x 245mm Net Weight: 9.5Kg Shipping Weight: 11Kg Horizontal Coverage: 90º Vertical Coverage: 60º ŠALJEMO NA ADRESU!!!
159.00€
MARTIN WISMAN SX500A (SX500A)
Technical Specifications Freq. Range (-10dB): 40Hz~20kHz Freq. Response (-3dB): 45Hz~18kHz Rec.Hipass Frequency: 25Hz Axial Sensitivity: 98dB(1W/1m) Max Calculated SPL: 129.5dB Rated System Power: 350W Continuous 1400W Peak LF Transducer: 15L350-81 HF Transducer: 25H44-81 Crossover Frequency: 1.7kHz Nominal Impedance: 8 Ohms Connector: 2 x NL4 Speakon Dim (HxWxD): 740mm x 475mm x 400mm Net Weight: 30Kg Shipping Weight: 35Kg Horizontal Coverage: 80º Vertical Coverage: 60º
Prikazana cena je za komad. High Impact Molded Polypropylene Enclosure 15L350-81 15 LF Transducer 1.75" Voice Coil, 1" Exit Titanium Compression Driver 5 Integral Suspension Points Complete Mounting Solutions Smooth Response With High Power Handling Capacity (Continuous Program/ RMS), 1400W/350W 80 x 60 Coverage Pattern
389.00€
Par aktivnih zvučnih kutija 2x120W (PAX25A)
Tehničke karakteristike: Jedna aktivna i jedna pasivna kutija Snaga: 2 x 120/80 W (8 Ohm) Niskotonski zvučnik: 250 mm papirna tkanina Piezo visokotonski zvučnik: 250 x 100 mm Ugrađena mikseta sa pojačalom Čitač kartice USB-SD/SDHC/MMC stereo MP3 plejer EHO funkcija Regulacija boje tona Mikrofonski ulaz (2 x 6,3 mm utičnica) Stereo audio ulaz (2 x RCA utičnica) Priključci za zvučnik sa štipaljkama Masivna metalna mrežica Upuštena drška Metalni ćoškovi, gumene nožice Napajanje: 230 V~ Dimenzije: 330 x 570 x 330 mm ( x2 kom. )
Jedna aktivna i jedna pasivna kutija Snaga: 2 x 120/80 W (8 Ohm) Niskotonski zvučnik: 250 mm papirna tkanina Piezo visokotonski zvučnik: 250 x 100 mm Ugrađena mikseta sa pojačalom Čitač kartice USB-SD/SDHC/MMC stereo MP3 plejer EHO funkcija Regulacija boje tona
199.00€
Par Aktivnih Zvučnih Kutija 2x120W (SAL20ACTIVE)
Tehničke karakteristike: Trosistemska bas-refleks izvedba Snaga: 2 x 120/80 Watt Frekvencija: 35 – 21.000 Hz Niskosrednji: papirna tkanina 200 mm Srednjotonski: 100 mm Ugrađeno pojačalo sa miksetom KARAOKE funkcija Zaštita od mikrofonije Regulacija boje tona niski/visoki Mikrofonski ulaz: 2 x 6,3 mm utičnica (MIC) Audio ulaz: 2 x RCA utičnica (L+R INPUT) Priključak zvučnika: opružni Napajanje: 230V~ Dimenzije: 240 x 600 x 320 mm (x 2 kom.) Cena iskazana je za par zvučnika, pošto se tako isporučuju
Trosistemska bas-refleks izvedba Snaga: 2 x 120/80 Watt Frekvencija: 35 – 21.000 Hz Niskosrednji: papirna tkanina 200 mm Srednjotonski: 100 mm Ugrađeno pojačalo sa miksetom KARAOKE funkcija Zaštita od mikrofonije Regulacija boje tona niski/visoki Mikrofonski ulaz: 2 x 6,3 mm utičnica (MIC) Audio ulaz: 2 x RCA utičnica (L+R INPUT)
139.00€
Per Page      1 - 30 of 34