Konektori

Sort By:  
Data cena je za komad prodaju se u setu 5 komada
0.30€
Data cena je za komad prodaju se u setu 5 komada
0.90€
Data cena je za komad prodaju se u setu 5 komada
0.40€
Tehničke karakteristike: Metalna Crne i crvene boje Za montažu ŠALJEMO NA ADRESU!!!
0.45€
Tehničke karakteristike: Crne,crvene i žute boje Plastični Metalni priljučni kontakt ŠALJEMO NA ADRESU!!!
0.20€
Tehničke karakteristike: Metalni Crne i crvene boje Pozlaćeni priključni kontakt Cena važi za 1 komad ŠALJEMO NA ADRESU!!!
0.95€
Tehničke karakteristike: Mono utikač Metalni ŠALJEMO NA ADRESU!!!
0.50€
Tehničke karakteristike: Mono utikač Gumirani Crveni ŠALJEMO NA ADRESU!!!
1.40€
Tehničke karakteristike: Mono utikač Metalni Opružni Crveni ŠALJEMO NA ADRESU!!!
1.40€
Tehničke karakteristike: Mono utikač Metalni Pod uglom ŠALJEMO NA ADRESU!!!
1.50€
Tehničke karakteristike: Mono utičnica Metalna Montaža na šasiju ŠALJEMO NA ADRESU!!!
0.50€
3 pole right angle female cable connector, nickel housing, silver contacts The RX Series is the right angle version of the XX cable connector series. The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief. Features & Benefits Extra slim right-angle connector 5 selectable cable outlet positions Unique cage design of female contact for low contact resistance and high integrity Female contact incorporates a solder barrier to prevent solder running into the contact mating area Female connector with improved solid metal latch which is larger and easier to handle Additional ground spring contacts for better shell ground continuity Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Coloured rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Branded with unique hologram - guarantees genuine and authentic Neutrik product
9.60€
3 pole female cable connector, Nickel housing FX cable connector with noiseless ON-OFF switch short-circuiting contacts 2+3. For use with a microphone without switch. Features & Benefits Built in noiseless ON-OFF switch short-circuiting contacts 2 + 3 For use on a microphone without switch Rugged zinc diecast shell, long lasting and durable Rugged metal boot Chuck type strain relief system for secure clamping of cables Boot with rubber gland gives high protection against bending stresses
15.00€
3 pole female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief. Features & Benefits Unique cage design of female contact for low contact resistance and high integrity Female contact incorporates a solder barrier to prevent solder running into the contact mating area Female connector with improved solid metal latch which is larger and easier to handle Additional ground spring contacts for better shell ground continuity Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Colored rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Rugged zinc diecast shell, longlasting and dependable Internal thread on shell is well protected against any damage Branded with unique hologram - guarantees genuine and authentic Neutrik product
4.30€
3 pole right angle male cable connector, nickel housing, silver contacts The RX Series is the right angle version of the XX cable connector series. The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief. Features & Benefits Extra slim right-angle connector 7 selectable cable outlet positions Male connector with improved locking recess without "window", more stringent housing increases durability Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Coloured rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Branded with unique hologram - guarantees genuine and authentic Neutrik product
8.30€
3 pole male cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief. Features & Benefits Male connector with improved locking recess without "window", more stringent housing increases durability Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Colored rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Rugged zinc diecast shell, longlasting and dependable Internal thread on shell is well protected against any damage Branded with unique hologram - guarantees genuine and authentic Neutrik product
3.90€
Pair of professional `Phono Plug` (`RCA`- or `CINCH`- type) - marked red and black. Including 2 x 2 strain reliefs for cable O.D. 3.0 mm to 7.3 mm. Additional strain relief for cable O.D. up to 8.0 mm available as accessory. Features & Benefits Makes ground before signal contact and breaks signal before ground No more disturbing noise and broken speaker cones Precisely machined to our demanding quality standards Neutrik unique chuck type strain relief Gold plated contacts Sleek barrel with soft touch surface and coloured shrink sleeve Improved ground solder lug for ease soldering
23.00€
2 pole cable connector, chuck type strain relief The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination. Features & Benefits Current rating 40 A continuous, 50 A audio signal with 50% duty cycle Only 3 parts, easy to assemble High impact materials – long-lasting and reliable Easy and extremely precise locking system "Quick Lock" 1 piece strain relief, chuck for 6 to 10 mm cable O.D. Improved grip on latch Mates with 4-pole chassis connector as well and makes contact with +1/-1
4.00€
1/4" professional phone plug, 2 pole, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks. Features & Benefits Extra slim 1/4" plug for highest packing density Robust diecast shell in stylish design Proven chuck type strain relief for reliable cable retention Sleek design for best handling convenience Precision machined one-piece contacts - avoid hook up of tip contact
3.50€
3 pole 1/4" professional phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88 mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks. Features & Benefits Extra slim 1/4" plug for highest packing density Robust diecast shell in stylish design Proven chuck type strain relief for reliable cable retention Sleek design for best handling convenience Precision machined one-piece contacts - avoid hook up of tip contact
5.00€
Utikač za montažu na kabel Vijčana montaža Crne boje Sa gumenim suspenzorom
0.50€
Data cena je za komad. Utikač za montažu na kabel Vijčana montaža Crvene boje
0.40€
Rean by Neutrik 3 pole 3.5 mm plug, black metal handle, gold plated contacts
2.00€
Data cena je za komad. Utičnica za ugradnju Papučice za priključenje kablova Dimenzije: 40 x 40 mm
0.70€
Data cena je za komad. Utičnica za ugradnju Papučice za priključenje kablova Dimenzije: 30 x 25 mm
0.50€
Data cena je za komad. Utikač za montažu na kabel Vijčana montaža
1.40€
Banana Utičnica Ugradna crna i Crvena (BA2/BK/RD)
Tehničke karakteristike: Plastična Izolovana Lemna montažna za kablu Montaža na šasiju Crna i Crvena
Data cena je za komad prodaju se u setu 5 komada
0.30€
Banana Utikač 4mm Crvena i Crna (BD5G/BK/RE)
Tehničke karakteristike: Plastični Pozlaćeni Vijčana montaža kabela Sa poprečnom rupom Crveni i Crni
Data cena je za komad prodaju se u setu 5 komada
0.90€
Banana Utikač Kraći 4mm Crvena i Crna (BD4/BK/RE)
Tehničke karakteristike: Plastični Vijčana montaža kabela Sa poprečnom rupom Crni i crveni
Data cena je za komad prodaju se u setu 5 komada
0.40€
Činč ugradna utičnica RCA31 (RCA31)
Tehničke karakteristike:
Metalna
Crne i crvene boje
Za montažu

ŠALJEMO NA ADRESU!!!
Tehničke karakteristike: Metalna Crne i crvene boje Za montažu ŠALJEMO NA ADRESU!!!
0.45€
Činč utikač RCA11 (RCA11)
Tehničke karakteristike:
Crne,crvene i žute boje
Plastični
Metalni priljučni kontakt

ŠALJEMO NA ADRESU!!!
Tehničke karakteristike: Crne,crvene i žute boje Plastični Metalni priljučni kontakt ŠALJEMO NA ADRESU!!!
0.20€
Činč utikač RCA11MF (RCA11MF)
Tehničke karakteristike:
Metalni
Crne i crvene boje
Pozlaćeni priključni kontakt
Cena važi za 1 komad

ŠALJEMO NA ADRESU!!!
Tehničke karakteristike: Metalni Crne i crvene boje Pozlaćeni priključni kontakt Cena važi za 1 komad ŠALJEMO NA ADRESU!!!
0.95€
Mono 3,5mm utikač SK5M (SK5M)
Tehničke karakteristike:
Mono utikač
Metalni

ŠALJEMO NA ADRESU!!!
Tehničke karakteristike: Mono utikač Metalni ŠALJEMO NA ADRESU!!!
0.50€
Mono 6,3 mm utikač SK2PG (SK2PG)
Tehničke karakteristike:
Mono utikač
Gumirani
Crveni

ŠALJEMO NA ADRESU!!!
Tehničke karakteristike: Mono utikač Gumirani Crveni ŠALJEMO NA ADRESU!!!
1.40€
Mono 6,3 mm utikač SK2PO (SK2PO)
Tehničke karakteristike:
Mono utikač
Metalni
Opružni
Crveni

ŠALJEMO NA ADRESU!!!
Tehničke karakteristike: Mono utikač Metalni Opružni Crveni ŠALJEMO NA ADRESU!!!
1.40€
Mono 6,3 mm utikač SK2PU (SK2PU)
Tehničke karakteristike:
Mono utikač
Metalni
Pod uglom

ŠALJEMO NA ADRESU!!!
Tehničke karakteristike: Mono utikač Metalni Pod uglom ŠALJEMO NA ADRESU!!!
1.50€
Mono 6,3mm utičnica SK2E (SK2E)
Tehničke karakteristike:
Mono utičnica
Metalna
Montaža na šasiju

ŠALJEMO NA ADRESU!!!
Tehničke karakteristike: Mono utičnica Metalna Montaža na šasiju ŠALJEMO NA ADRESU!!!
0.50€
Neutrik NC-3 FRX (NC3 FRX)

3 pole right angle female cable connector, nickel housing, silver contacts

The RX Series is the right angle version of the XX cable connector series. The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

 
 

Features & Benefits

  • Extra slim right-angle connector
  • 5 selectable cable outlet positions
  • Unique cage design of female contact for low contact resistance and high integrity
  • Female contact incorporates a solder barrier to prevent solder running into the contact mating area
  • Female connector with improved solid metal latch which is larger and easier to handle
  • Additional ground spring contacts for better shell ground continuity
  • Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
  • Boot with polyurethane gland gives high protection to cable bending stresses
  • Coloured rings and boots available for coding or identification
  • Sleek and ergonomic design - valuable and handy
  • Branded with unique hologram - guarantees genuine and authentic Neutrik product

 

Outlet Positions

 
 
 

Technical Information hide

Product
Title
NC3FRX
 
Connection Type
XLR 
 
Gender
female 
 
Electrical
Capacitance between contacts
≤ 4 pF 
 
Contact resistance
≤ 3 mΩ 
 
Dielectric strength
1,5 kVdc 
 
Insulation resistance
> 2 GΩ (initial)
 
Rated current per contact
16 A 
 
Rated voltage
< 50 V 
 
Mechanical
Cable O.D.
3.5 - 8.0 mm 
 
Insertion force
≤ 20 N 
 
Withdrawal force
≤ 20 N 
 
Lifetime
> 1000 mating cycles 
 
Wiresize
max. 2.5 mm² 
 
Wiresize
max. 14 AWG 
 
Wiring
Solder contacts 
 
Material
Boot
Polyurethan 
 
Contact plating
2 µm Ag 
 
Contacts
Bronze (CuSn8) 
 
Insert
Polyamide (PA 6.6 30 % GR) 
 
Locking element
Zinc diecast (ZnAl4Cu1) / Ck 67 (spring) 
 
Shell
Zinc diecast (ZnAl4Cu1) 
 
Shell plating
Nickel 
 
Strain relief
Polyacetal (POM) 
 
Environmental
Flammability
UL 94 HB 
 
Standard compliance
IEC 61076-2-103
 
Protection class
IP 40 
 
Solderability
Complies with IEC 68-2-20 
 
Temperature range
-30 °C to +80 °C
3 pole right angle female cable connector, nickel housing, silver contacts The RX Series is the right angle version of the XX cable connector series. The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief. Features & Benefits Extra slim right-angle connector 5 selectable cable outlet positions Unique cage design of female contact for low contact resistance and high integrity Female contact incorporates a solder barrier to prevent solder running into the contact mating area Female connector with improved solid metal latch which is larger and easier to handle Additional ground spring contacts for better shell ground continuity Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Coloured rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Branded with unique hologram - guarantees genuine and authentic Neutrik product
9.60€
Neutrik NC-3 FXS (NC3 FXS)

3 pole female cable connector, Nickel housing

FX cable connector with noiseless ON-OFF switch short-circuiting contacts 2+3. For use with a microphone without switch.

 
 

Features & Benefits

  • Built in noiseless ON-OFF switch short-circuiting contacts 2 + 3
  • For use on a microphone without switch
  • Rugged zinc diecast shell, long lasting and durable
  • Rugged metal boot
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses
 
 
 

Technical Information hide

Product
Title
NC3FXS
 
Connection Type
XLR 
 
Gender
female 
 
Electrical
Capacitance between contacts
≤ 4 pF 
 
Contact resistance
≤ 3 mΩ 
 
Dielectric strength
1,5 kVdc 
 
Insulation resistance
> 10 GΩ (initial)
 
Rated current per contact
16 A 
 
Rated voltage
< 50 V 
 
Mechanical
Cable O.D.
3.5 - 7.0 mm 
 
Insertion force
≤ 20 N 
 
Withdrawal force
≤ 20 N 
 
Lifetime
> 1000 mating cycles 
 
Wiresize
max. 2.5 mm² 
 
Wiresize
max. 14 AWG 
 
Wiring
Solder contacts 
 
Locking device
Latch lock 
 
Material
Boot
Polyurethan 
 
Contact plating
0.2 µm Au hard alloy over 2 µm Ni 
 
Contacts
Bronze (CuSn6) 
 
Insert
Polyamide (PA 6.6 30 % GR) 
 
Locking element
St3K32 (latch) / Ck 67 (spring) 
 
Shell
Zinc diecast (ZnAl4Cu1) 
 
Shell plating
Nickel 
 
Strain relief
Polyacetal (POM) 
 
Environmental
Flammability
UL 94 HB 
 
Standard compliance
IEC 61076-2-103
 
Protection class
IP 40 
 
Solderability
Complies with IEC 68-2-20 
 
Temperature range
-30 °C to +80 °C
3 pole female cable connector, Nickel housing FX cable connector with noiseless ON-OFF switch short-circuiting contacts 2+3. For use with a microphone without switch. Features & Benefits Built in noiseless ON-OFF switch short-circuiting contacts 2 + 3 For use on a microphone without switch Rugged zinc diecast shell, long lasting and durable Rugged metal boot Chuck type strain relief system for secure clamping of cables Boot with rubber gland gives high protection against bending stresses
15.00€
Neutrik NC-3 FXX (NC-3 FXX)

3 pole female cable connector with Nickel housing and silver contacts.

The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

 
 

Features & Benefits

  • Unique cage design of female contact for low contact resistance and high integrity
  • Female contact incorporates a solder barrier to prevent solder running into the contact mating area
  • Female connector with improved solid metal latch which is larger and easier to handle
  • Additional ground spring contacts for better shell ground continuity
  • Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
  • Boot with polyurethane gland gives high protection to cable bending stresses
  • Colored rings and boots available for coding or identification
  • Sleek and ergonomic design - valuable and handy
  • Rugged zinc diecast shell, longlasting and dependable
  • Internal thread on shell is well protected against any damage
  • Branded with unique hologram - guarantees genuine and authentic Neutrik product
 
 
 

Technical Information hide

Product
Title
NC3FXX
 
Connection Type
XLR 
 
Gender
female 
 
Electrical
Capacitance between contacts
≤ 4 pF 
 
Contact resistance
≤ 3 mΩ 
 
Dielectric strength
1,5 kVdc 
 
Insulation resistance
> 10 GΩ (initial)
 
Rated current per contact
16 A 
 
Rated voltage
< 50 V 
 
Mechanical
Cable O.D.
3.5 - 8.0 mm 
 
Insertion force
≤ 20 N 
 
Withdrawal force
≤ 20 N 
 
Lifetime
> 1000 mating cycles 
 
Wiresize
max. 2.5 mm² 
 
Wiresize
max. 14 AWG 
 
Locking device
Latch lock 
 
Material
Boot
Polyurethan 
 
Contact plating
2 µm Ag 
 
Contacts
Bronze (CuSn8) 
 
Insert
Polyamide (PA 6.6 30 % GR) 
 
Locking element
Zinc diecast (ZnAl4Cu1) / Ck 67 (spring) 
 
Shell
Zinc diecast (ZnAl4Cu1) 
 
Shell plating
Nickel 
 
Strain relief
Polyacetal (POM) 
 
Environmental
Flammability
UL 94 HB 
 
Standard compliance
IEC 61076-2-103
 
Protection class
IP 40 
 
Solderability
Complies with IEC 68-2-20 
 
Temperature range
-30 °C to +80 °C 
 
 
 
3 pole female cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief. Features & Benefits Unique cage design of female contact for low contact resistance and high integrity Female contact incorporates a solder barrier to prevent solder running into the contact mating area Female connector with improved solid metal latch which is larger and easier to handle Additional ground spring contacts for better shell ground continuity Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Colored rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Rugged zinc diecast shell, longlasting and dependable Internal thread on shell is well protected against any damage Branded with unique hologram - guarantees genuine and authentic Neutrik product
4.30€
Neutrik NC-3 MRX (NC3 MRX)

3 pole right angle male cable connector, nickel housing, silver contacts

The RX Series is the right angle version of the XX cable connector series. The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

 
 

Features & Benefits

  • Extra slim right-angle connector
  • 7 selectable cable outlet positions
  • Male connector with improved locking recess without "window", more stringent housing increases durability
  • Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
  • Boot with polyurethane gland gives high protection to cable bending stresses
  • Coloured rings and boots available for coding or identification
  • Sleek and ergonomic design - valuable and handy
  • Branded with unique hologram - guarantees genuine and authentic Neutrik product

 

Outlet Positions

 
 
 

Technical Information hide

Product
Title
NC3MRX
 
Connection Type
XLR 
 
Gender
male 
 
Electrical
Capacitance between contacts
≤ 4 pF 
 
Contact resistance
≤ 3 mΩ 
 
Dielectric strength
1,5 kVdc 
 
Insulation resistance
> 2 GΩ (initial)
 
Rated current per contact
16 A 
 
Rated voltage
< 50 V 
 
Mechanical
Cable O.D.
3.5 - 8.0 mm 
 
Insertion force
≤ 20 N 
 
Withdrawal force
≤ 20 N 
 
Lifetime
> 1000 mating cycles 
 
Wiresize
max. 2.5 mm² 
 
Wiresize
max. 14 AWG 
 
Wiring
Solder contacts 
 
Locking device
Latch lock 
 
Material
Boot
Polyurethan 
 
Contact plating
2 µm Ag 
 
Contacts
Bronze (CuSn8) 
 
Insert
Polyamide (PA 6.6 30 % GR) 
 
Locking element
Zinc diecast (ZnAl4Cu1) 
 
Shell
Zinc diecast (ZnAl4Cu1) 
 
Shell plating
Nickel 
 
Strain relief
Polyacetal (POM) 
 
Environmental
Flammability
UL 94 HB 
 
Standard compliance
IEC 61076-2-103
 
Protection class
IP 40 
 
Solderability
Complies with IEC 68-2-20 
 
Temperature range
-30 °C to +80 °C 
 
 
 
3 pole right angle male cable connector, nickel housing, silver contacts The RX Series is the right angle version of the XX cable connector series. The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief. Features & Benefits Extra slim right-angle connector 7 selectable cable outlet positions Male connector with improved locking recess without "window", more stringent housing increases durability Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Coloured rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Branded with unique hologram - guarantees genuine and authentic Neutrik product
8.30€
Neutrik NC-3 MXX (NC-3 MXX)

3 pole male cable connector with Nickel housing and silver contacts.

The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

 
 

Features & Benefits

  • Male connector with improved locking recess without "window", more stringent housing increases durability
  • Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
  • Boot with polyurethane gland gives high protection to cable bending stresses
  • Colored rings and boots available for coding or identification
  • Sleek and ergonomic design - valuable and handy
  • Rugged zinc diecast shell, longlasting and dependable
  • Internal thread on shell is well protected against any damage
  • Branded with unique hologram - guarantees genuine and authentic Neutrik product
 
 
 

Technical Information hide

Product
Title
NC3MXX
 
Connection Type
XLR 
 
Gender
male 
 
Electrical
Capacitance between contacts
≤ 4 pF 
 
Contact resistance
≤ 3 mΩ 
 
Dielectric strength
1,5 kVdc 
 
Insulation resistance
> 10 GΩ (initial)
 
Rated current per contact
16 A 
 
Rated voltage
< 50 V 
 
Mechanical
Cable O.D.
3.5 - 8.0 mm 
 
Insertion force
≤ 20 N 
 
Withdrawal force
≤ 20 N 
 
Lifetime
> 1000 mating cycles 
 
Wiresize
max. 2.5 mm² 
 
Wiresize
max. 14 AWG 
 
Wiring
Solder contacts 
 
Locking device
Latch lock 
 
Material
Boot
Polyurethan 
 
Contact plating
2 µm Ag 
 
Contacts
Brass (CuZn39Pb3) 
 
Insert
Polyamide (PA 6.6 30 % GR) 
 
Locking element
Zinc diecast (ZnAl4Cu1) 
 
Shell
Zinc diecast (ZnAl4Cu1) 
 
Shell plating
Nickel 
 
Strain relief
Polyacetal (POM) 
 
Environmental
Flammability
UL 94 HB 
 
Standard compliance
IEC 61076-2-103
 
Protection class
IP 40 
 
Solderability
Complies with IEC 68-2-20 
 
Temperature range
-30 °C to +80 °C 
 
 
 
3 pole male cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief. Features & Benefits Male connector with improved locking recess without "window", more stringent housing increases durability Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Colored rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Rugged zinc diecast shell, longlasting and dependable Internal thread on shell is well protected against any damage Branded with unique hologram - guarantees genuine and authentic Neutrik product
3.90€
Neutrik NF-2C/2B (NF2C B/2)

Pair of professional `Phono Plug` (`RCA`- or `CINCH`- type) - marked red and black.

Including 2 x 2 strain reliefs for cable O.D. 3.0 mm to 7.3 mm. Additional strain relief for cable O.D. up to 8.0 mm available as accessory.

 
 

Features & Benefits

  • Makes ground before signal contact and breaks signal before ground
  • No more disturbing noise and broken speaker cones
  • Precisely machined to our demanding quality standards
  • Neutrik unique chuck type strain relief
  • Gold plated contacts
  • Sleek barrel with soft touch surface and coloured shrink sleeve
  • Improved ground solder lug for ease soldering
 
 
 

Technical Information hide

Product
Title
NF2C-B/2
 
Connection Type
Profi 
 
Gender
male 
 
Electrical
Capacitance between contacts
≤ 7 pF 
 
Contact resistance
>10G mΩ 
 
Dielectric strength
1,5 kVdc 
 
Insulation resistance
> 5 GΩ 
 
Rated current per contact
depends on mating connector / A 
 
Rated voltage
< 50 V 
 
Mechanical
Cable O.D.
3.0 - 7.3 mm 
 
Lifetime
> 2000 mating cycles 
 
Wiresize
1,5 mm² 
 
Wiresize
16 AWG 
 
Wiring
Solder contacts 
 
Material
Contact plating
5 µm Au over 5 µm Ni 
 
Contacts
Brass (CuZn39Pb3) 
 
Insert
PBTP 20 % GR 
 
Shell
Brass (CuZn39Pb3) 
 
Strain relief
Polyacetal (POM) 
 
Environmental
Flammability
UL 94 HB 
 
Standard compliance
IEC 601-14
 
Protection class
IP 40 
 
Solderability
Complies with IEC 68-2-20 
 
Temperature range
-30 °C to +80 °C 
 
 
 
Pair of professional `Phono Plug` (`RCA`- or `CINCH`- type) - marked red and black. Including 2 x 2 strain reliefs for cable O.D. 3.0 mm to 7.3 mm. Additional strain relief for cable O.D. up to 8.0 mm available as accessory. Features & Benefits Makes ground before signal contact and breaks signal before ground No more disturbing noise and broken speaker cones Precisely machined to our demanding quality standards Neutrik unique chuck type strain relief Gold plated contacts Sleek barrel with soft touch surface and coloured shrink sleeve Improved ground solder lug for ease soldering
23.00€
Neutrik NL-2 FX (NL-2 FX)

2 pole cable connector, chuck type strain relief

The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination.

 
 

Features & Benefits

  • Current rating 40 A continuous, 50 A audio signal with 50% duty cycle
  • Only 3 parts, easy to assemble
  • High impact materials – long-lasting and reliable
  • Easy and extremely precise locking system "Quick Lock"
  • 1 piece strain relief, chuck for 6 to 10 mm cable O.D.
  • Improved grip on latch
  • Mates with 4-pole chassis connector as well and makes contact with +1/-1
 
NL2FX
 
 

Technical Information hide

Product
Title
NL2FX
 
Connection Type
speakON 
 
Gender
female 
 
Electrical
Contact resistance
< 2 mΩ (after lifetime)
 
Dielectric strength
4 kVdc (peak)
 
Insulation resistance
> 1 GΩ (after dampheat)
 
Rated current per contact
40 A rms continuous
 
Rated current per contact
50 A audiosignal, duty cycle 50 %
 
Rated voltage
250 V (Insulation)
 
Attention
speakON is not to be used as an AC mains or power supply connector!
 
Mechanical
Cable O.D.
6 - 10 mm 
 
Cable retention
≥ 220 N (subject to cable O.D. and material)
 
Lifetime
> 5000 mating cycles 
 
Wiresize
1.5 - 4 mm² 
 
Wiresize
16 - 12 AWG 
 
Wiring
screw type terminals or soldering 
 
Locking device
Quick Lock (latch)
 
Material
Contact plating
4 µm Ag 
 
Contacts
Brass (CuZn39Pb3) 
 
Insert
PBTP 20 % GR 
 
Locking element
Zinc diecast (ZnAl4Cu1) 
 
Shell
PBTP 20 % GR 
 
Strain relief
Polyacetal (POM) 
 
Environmental
Flammability
UL 94 HB 
 
Solderability
Complies with IEC 68-2-20 
 
Temperature range
-30 °C to +80 °C
2 pole cable connector, chuck type strain relief The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination. Features & Benefits Current rating 40 A continuous, 50 A audio signal with 50% duty cycle Only 3 parts, easy to assemble High impact materials – long-lasting and reliable Easy and extremely precise locking system "Quick Lock" 1 piece strain relief, chuck for 6 to 10 mm cable O.D. Improved grip on latch Mates with 4-pole chassis connector as well and makes contact with +1/-1
4.00€
Neutrik NP-2 RX


2 pole 1/4" professional right-angle phone plug, gold contacts, black shell

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

 
 

Features & Benefits

  • All metal housing eliminates the plastic cover of the predecessor NP*RCS and improves further durability and EMI protection
  • Extra slim 1/4" plug for highest packing density
  • Robust diecast shell in stylish design
  • Proven chuck type strain relief for reliable cable retention
  • Sleek design for best handling convenience
  • Precision machined one-piece contacts - avoid hook up of tip contact
 
Product
Title
NP2RX-B
 
Connection Type
Plug 
 
Gender
male 
 
Electrical
Contact resistance
depends on mating connector mΩ 
 
Dielectric strength
1 kVdc 
 
Insulation resistance
> 2 GΩ (initial)
 
Rated current per contact
depends on mating connector A 
 
Rated voltage
< 50 V 
 
Mechanical
Cable O.D.
4 - 7 mm 
 
Lifetime
> 1000 mating cycles 
 
Wiresize
1 mm² 
 
Wiresize
18 AWG 
 
Wiring
Solder contacts 
 
Material
Bushing
Polyacetal (POM) + PU 
 
Contact plating
0.2 µm Au 
 
Contacts
Brass (CuZn39Pb3) 
 
Insert
Polyamide (PA 6.6 30 % GR) 
 
Shell
Zinc diecast (ZnAl4Cu1) 
 
Shell plating
Black chromium 
 
Strain relief
Polyacetal (POM) 
 
Environmental
Standard compliance
IEC 60603-11 / EIA RS-453
 
Solderability
Complies with IEC 68-2-20 
 
Temperature range
-20 °C to +65 °C

 
4.50€
Neutrik NP-2 X (NP2 X)

1/4" professional phone plug, 2 pole, nickel contacts, nickel shell

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
 

 
 

Features & Benefits

  • Extra slim 1/4" plug for highest packing density
  • Robust diecast shell in stylish design
  • Proven chuck type strain relief for reliable cable retention
  • Sleek design for best handling convenience
  • Precision machined one-piece contacts - avoid hook up of tip contact
 
 
 

Technical Information hide

Product
Title
NP2X
 
Connection Type
Plug 
 
Gender
male 
 
Electrical
Contact resistance
depends on mating connector mΩ 
 
Dielectric strength
1 kVdc 
 
Insulation resistance
> 2 (initial) GΩ ≥ 1 GΩ (after damp heat test)
 
Rated current per contact
depends on mating connector A 
 
Rated voltage
< 50 V 
 
Mechanical
Cable O.D.
4 - 7 mm 
 
Lifetime
> 1000 mating cycles 
 
Wiresize
1 mm² 
 
Wiresize
18 AWG 
 
Wiring
Solder contacts 
 
Material
Bushing
Polyacetal (POM) + PU 
 
Contact plating
2 µm Ni (Su) 
 
Contacts
Brass (CuZn39Pb3) 
 
Insert
Polyamide (PA 6.6 30 % GR) 
 
Shell
Zinc diecast (ZnAl4Cu1) 
 
Shell plating
Nickel 
 
Strain relief
Polyacetal (POM) 
 
Environmental
Standard compliance
IEC 60603-11 / EIA RS-453
 
Solderability
Complies with IEC 68-2-20 
 
Temperature range
-20 °C to +65 °C 
 
 
 
1/4" professional phone plug, 2 pole, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks. Features & Benefits Extra slim 1/4" plug for highest packing density Robust diecast shell in stylish design Proven chuck type strain relief for reliable cable retention Sleek design for best handling convenience Precision machined one-piece contacts - avoid hook up of tip contact
3.50€
Neutrik NP-3 X (NP-3 X)

3 pole 1/4" professional phone plug, nickel contacts, nickel shell

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88 mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

 
 

Features & Benefits

  • Extra slim 1/4" plug for highest packing density
  • Robust diecast shell in stylish design
  • Proven chuck type strain relief for reliable cable retention
  • Sleek design for best handling convenience
  • Precision machined one-piece contacts - avoid hook up of tip contact
 
 
 

Technical Information hide

Product
Title
NP3X
 
Connection Type
Plug 
 
Gender
male 
 
Electrical
Contact resistance
depends on mating connector mΩ 
 
Dielectric strength
1 kVdc 
 
Insulation resistance
> 2 GΩ (initial)
 
Rated current per contact
depends on mating connector A 
 
Rated voltage
< 50 V 
 
Mechanical
Cable O.D.
4 - 7 mm 
 
Lifetime
> 1000 mating cycles 
 
Wiresize
1 mm² 
 
Wiresize
18 AWG 
 
Wiring
Solder contacts 
 
Material
Bushing
Polyacetal (POM) + PU 
 
Contact plating
2 µm Ni (Su) 
 
Contacts
Brass (CuZn39Pb3) 
 
Insert
Polyamide (PA 6.6 30 % GR) 
 
Shell
Zinc diecast (ZnAl4Cu1) 
 
Shell plating
Nickel 
 
Strain relief
Polyacetal (POM) 
 
Environmental
Standard compliance
IEC 60603-11 / EIA RS-453
 
Solderability
Complies with IEC 68-2-20 
 
Temperature range
-20 °C to +65 °C 
 
 
 
3 pole 1/4" professional phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88 mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks. Features & Benefits Extra slim 1/4" plug for highest packing density Robust diecast shell in stylish design Proven chuck type strain relief for reliable cable retention Sleek design for best handling convenience Precision machined one-piece contacts - avoid hook up of tip contact
5.00€
Neutrik NP3RX (NP3RX)


3 pole right-angle 1/4" professional phone plug, nickel contacts, nickel shell

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88 mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

 
 

Features & Benefits

  • All metal housing eliminates the plastic cover of the predecessor NP*RCS and improves further durability and EMI protection
  • Extra slim 1/4" plug for highest packing density
  • Robust diecast shell in stylish design
  • Proven chuck type strain relief for reliable cable retention
  • Sleek design for best handling convenience
  • Precision machined one-piece contacts - avoid hook up of tip contact
 
Product
Title
NP3RX
 
Connection Type
Plug 
 
Gender
male 
 
Electrical
Contact resistance
depends on mating connector mΩ 
 
Dielectric strength
1 kVdc 
 
Insulation resistance
> 2 GΩ (initial)
 
Rated current per contact
depends on mating connector A 
 
Rated voltage
< 50 V 
 
Mechanical
Cable O.D.
4 - 7 mm 
 
Lifetime
> 1000 mating cycles 
 
Wiresize
1 mm² 
 
Wiresize
18 AWG 
 
Wiring
Solder contacts 
 
Material
Bushing
Polyacetal (POM) + PU 
 
Contact plating
2 µm Ni (Su) 
 
Contacts
Brass (CuZn39Pb3) 
 
Insert
Polyamide (PA 6.6 30 % GR) 
 
Shell
Zinc diecast (ZnAl4Cu1) 
 
Shell plating
Nickel 
 
Strain relief
Polyacetal (POM) 
 
Environmental
Standard compliance
IEC 60603-11 / EIA RS-453
 
Solderability
Complies with IEC 68-2-20 
 
Temperature range
-20 °C to +65 °C

 
7.20€
Neutrik NTP-3 RC (NTP-3 RC)


3 pole 3.5 mm audio plug, solder termination, chuck type strain relief, bushing, black housing, gold contacts

The only right-angled metal bodied 3.5 mm jack plug with chuck type strain relief for secure cable retention. It accepts cables from 2.0 to 4.5 mm.

 
 

Features & Benefits

  • All metal housing - robust and reliable
  • Chuck type cable clamp and rubber gland - excellent cable protection
  • Slim design - space saving
 
Product
Title
NTP3RC-B
 
Connection Type
Plug 
 
Gender
male 
 
Electrical
Contact resistance
depends on mating connector mΩ 
 
Dielectric strength
1 kVdc 
 
Insulation resistance
> 2 GΩ (initial)
 
Rated voltage
<50 V 
 
Mechanical
Cable O.D.
2 - 4.5 mm 
 
Wiresize
0,22 mm² 
 
Wiresize
24 AWG 
 
Wiring
Solder contacts 
 
Material
Bushing
Brass (CuZn39Pb3) + PU, black Cr 
 
Contact plating
0.2 µm Au 
 
Contacts
Brass (CuZn39Pb3) 
 
Insert
Polyamide (PA 6.6 15 % GR) 
 
Shell
Zinc diecast (ZnAl4Cu1) 
 
Shell plating
Black chromium 
 
Strain relief
Polyacetal (POM) 
 
Environmental
Solderability
Complies with IEC 68-2-20 
 
Temperature range
-20 °C to +65 °C
4.70€
Priključak za Zvučnik Black (SL5)
Tehničke karakteristike: Utikač za montažu na kabel Vijčana montaža Crne boje Sa gumenim suspenzorom
Utikač za montažu na kabel Vijčana montaža Crne boje Sa gumenim suspenzorom
0.50€
Priključak za Zvučnik Red (SL1S/RD)
Tehničke karakteristike: Utikač za montažu na kabel Vijčana montaža Crvene boje
Data cena je za komad. Utikač za montažu na kabel Vijčana montaža Crvene boje
0.40€
Rean by Neutrik NYS-231 BG (NYS231 BG)

3 pole 3.5 mm plug, black metal handle, gold plated contacts

 
 
 
 

Technical Information hide

Product
Title
NYS231BG
 
Connection Type
Plug 
 
Gender
male 
 
Electrical
Dielectric strength
0.5 kVdc 
 
Insulation resistance
≥ 1 GΩ 
 
Rated current
depends on mated connector
 
Contact resistance
depends on mated connector
 
Mechanical
Cable O.D.
4 mm 
 
Insertion force
≤ 20 N 
 
Withdrawal force
≥ 10 N 
 
Lifetime
1000 mating cycles 
 
Material
Contact plating
Au 
 
Contacts
Brass (CuZn39Pb3) 
 
Shell
Zinc diecast (ZnAl4Cu1) 
 
Shell plating
Black 
 
Strain relief
SnCe plated, crimp type
 
Insulation
Thermoplastic
 
Environmental
Solderability
Complies with IEC 68-2-20 
 
Temperature range
-25 °C to +70 °C
Rean by Neutrik 3 pole 3.5 mm plug, black metal handle, gold plated contacts
2.00€
SPEAKON Priključak Kocka (S1092)
Tehničke karakteristike: Utičnica za ugradnju Papučice za priključenje kablova Dimenzije: 40 x 40 mm
Data cena je za komad. Utičnica za ugradnju Papučice za priključenje kablova Dimenzije: 40 x 40 mm
0.70€
SPEAKON Priključak Manji (S1085)
Tehničke karakteristike: Utičnica za ugradnju Papučice za priključenje kablova Dimenzije: 30 x 25 mm
Data cena je za komad. Utičnica za ugradnju Papučice za priključenje kablova Dimenzije: 30 x 25 mm
0.50€
SPEAKON Priključak Manji (S1091)
Tehničke karakteristike: Utikač za montažu na kabel Vijčana montaža
Data cena je za komad. Utikač za montažu na kabel Vijčana montaža
1.40€
Per Page      1 - 30 of 46